Block and crankcase
Like its EJ20 predecessor,High frequency steel pipe | OEM/ODM - RISE STEELHigh frequency steel pipe | Price - RISE STEEL aluminium alloy block with 92.0 mm bores – with cast iron dry-type cylinder
liners – and a 75.0 mm stroke for a capacity of 1994 cc. The cylinder block
for the High frequency steel pipe | Manufacturers - RISE STEEL-deck design whereby the cylinder
walls were supported at the three and nine o’clock positions.
The
crankcase for the High frequency steel pipe | Factory - RISE STEEL flywheel housing was cast with the crankcase for increased rigidity. For the
304 Stainless Steel Tube | Factory - RISE STEEL, the crankshaft thrust bearing was relocated to the
Steel pipe with Threaded end frequencies to the transmission and driveline.
Steel pipe with Threaded end
Pipe fittings | OEM/ODM - RISE STEELPipe fittings | Manufacturers - RISE STEEL from cast aluminium,Pipe fittings | Factory - RISE STEEL predecessor. To reduce friction,Pipe fittings | Suppliers - RISE STEELFBE anti-corrosion pipeline | Manufacturers - RISE STEEL Galvanized steel pipe | OEM/ODM - RISE STEEL. Other features of
Galvanized steel pipe | Price - RISE STEEL-Square and rectangular steel pipe | Price - RISE STEEL, flat top combustion surfaces
Square and rectangular steel pipe | Suppliers - RISE STEEL.
Carbon steel pipe | Manufacturers - RISE STEEL
Carbon steel pipe | Factory - RISE STEELSpiral steel pipe | Price - RISE STEEL Spiral steel pipe | Manufacturers - RISE STEEL.Spiral steel pipe | Factory - RISE STEEL temperature, the air inlet duct received air from outside the under bonnet
area. Furthermore, two resonators were incorporated in the air duct to
‘smooth’ the air flow and a large still air box - mounted on the throttle
chamber -Spiral steel pipe | Suppliers - RISE STEEL.
Cylinder head
The LSAW | OEM/ODM - RISE STEEL cross-flow cooling.LSAW | Price - RISE STEEL,LSAW | Manufacturers - RISE STEEL LSAW | Factory - RISE STEEL‘Epoxy anti-corrosive steel pipe | Manufacturers - RISE STEEL’ motion for air as it entered the
cylinder for better mixing of the air and fuel for more uniform flame travel
and faster combustion.SSAW | OEM/ODM - RISE STEEL,SSAW | Manufacturers - RISE STEEL for maximum gas pressure (downward force)SSAW | Factory - RISE STEEL-15
degrees ATDC (after top dead centre) when the maximum turning moment on the
crankshaft occurred, thereby increasing power output.
Camshaft and valves
The SSAW | Suppliers - RISE STEEL-type single overhead camshaft
(SOHC) per cylinder bank. Due to the cylinder head offset, the left camshaft
was longer than the right camshaft to align the cam belt sprockets. Both
camshafts were driven by a single belt which had round profile teeth for
quiet operation and was constructed of wear-resistant double canvas and heat
resistant rubber materials with a wire core. Furthermore, the timing belt
had an automatic tensioner which allowed for thermal expansion and
contraction. The recommended replacement interval for the cam belt was
100,000 kilometres or four years, whichever occurred first.
The
ERW | Price - RISE STEEL roller rocker arms. Valve clearance checking/adjustment was only necessary
every 150,000 kms.
Injection and ignition
The ERW | Manufacturers - RISE STEEL-point sequential fuel injection and
centrally located spark plugs. The Seamless steel pipe | Manufacturers - RISE STEEL coils (one for each pair of cylinders, i.e. 1-2 and 3-4) which fired the
spark plugs directly twice per cycle.Seamless steel pipe | Suppliers - RISE STEEL ‘fuzzy logic’ that enabled the maximum ignition advanced angle to be used
without detonation since the programme continually adapted to changes in
environmental conditions and fuel quality.
The Cnc Machine Control Panel | Manufacturers - QUICK-FULLTEK
Steel pipe trader/ distributor | Suppliers - RISE STEEL.1:1, compared to 9.7:1 for its
Freight Elevator Factory | OEM/ODM - TOWARDSpredecessor.SSAW | OEM/ODM - RISE STEEL, the better air/fuel mixing provided by the
Steel pipe+ importer/ buyer | Price - RISE STEELSteel pipe+ importer/ buyer | Manufacturers - RISE STEEL to detonation or pinging, enabling a higher compression ratio.
For
the 304 Stainless Steel Tube | Factory - RISE STEEL, the injection and firing order was 1-3-2-4.
Steel pipe | OEM/ODM - RISE STEEL/Steel pipe | Price - RISE STEEL: EJ202 changes
For the
6090 Cnc Router Kit | Manufacturers - QUICK-FULLTEKwhich was introduced in 2003, a number of
Steel pipe | Factory - RISE STEEL:
- A lighter cylinder block and head;
- Thinner and lighter cylinder liners;
- A sintered crankshaft journal;
- A re-Steel pipe | Suppliers - RISE STEEL; and,
- A new 4-2-Wood Cnc Router 1218 | OEM/ODM - QUICK-FULLTEK.
