Cylinder head and camshafts
The Wholesale China 4 Welded Wire Mesh OEM/ODM Quotes - Best Hardware-driven double
overhead camshafts (DOHC) per cylinder bank. The Wholesale China 4 Welded Wire Mesh Factory - Best Hardware Wholesale China 4 Welded Wire Mesh Manufacturers - Best Hardware:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Wholesale China 4 Welded Wire Mesh Suppliers - Best Hardware incorporated on the front surface of the block and cylinder heads, while the
OEM China Square Welded Wire Mesh Wholesaler - Best Hardware with three bonds.
Dual AVCS
The OEM China Square Welded Wire Mesh Factory - Best Hardware's 'OEM China Welded Wire Mesh Concrete Reinforcement Manufacturers - Best Hardware'
(Dual AVCS)OEM China Square Welded Wire Mesh Manufacturers - Best Hardware.
Operation of the Dual AVCS may be summarised as follows:
- OEM China Square Welded Wire Mesh Suppliers - Best Hardware setting. To advance, the camshaft rotated in the same direction as the
Supply China Square Welded Wire Mesh OEM/ODM Quotes - Best Hardware(Supply China Square Welded Wire Mesh Wholesaler - Best Hardware).
Supply China Square Welded Wire Mesh Exporter - Best Hardware, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Supply China Square Welded Wire Mesh Factory - Best Hardware rotation (Supply China Square Welded Wire Mesh Manufacturers - Best Hardware).
When the exhaust camshaft was retarded, it allowed the expanding gases
Wholesale China Square Welded Wire Mesh Exporter - Best Hardware for better fuel efficiency.
By
Wholesale China Square Welded Wire Mesh Manufacturers - Best Hardware, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Wholesale China Square Welded Wire Mesh Suppliers - Best Hardware.OEM China 2 Welded Wire Mesh OEM/ODM Quotes - Best Hardware start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
OEM China 2 Welded Wire Mesh Wholesaler - Best Hardware, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The OEM China 2 Welded Wire Mesh Exporter - Best Hardware, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the OEM China 2 Welded Wire Mesh Factory - Best Hardware had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the OEM China 2 Welded Wire Mesh Manufacturers - Best Hardware Supply China 2 Welded Wire Mesh OEM/ODM Quotes - Best Hardware, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Supply China 2 Welded Wire Mesh Exporter - Best Hardware feedback.
The injection and firing order for the Wholesale China Black Pvc Coated Welded Wire Mesh Suppliers - Best Hardwarewas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Supply China 2 Welded Wire Mesh Manufacturers - Best Hardware parallel-Supply China 2 Welded Wire Mesh Suppliers - Best Hardware. The parallel-Wholesale China 2 Welded Wire Mesh OEM/ODM Quotes - Best Hardware Wholesale China 2 Welded Wire Mesh Wholesaler - Best Hardware cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Wholesale China 2 Welded Wire Mesh Factory - Best Hardware combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
Wholesale China 2 Welded Wire Mesh Manufacturers - Best Hardware enabled safe operation on lower RON fuel. Furthermore,OEM China 3x3 Welded Wire Mesh OEM/ODM Quotes - Best Hardware OEM China 3x3 Welded Wire Mesh Wholesaler - Best Hardware.
Exhaust
Compared to the EZ30R which had a ‘J turn’OEM China 3x3 Welded Wire Mesh Factory - Best Hardware, the OEM China 2 Welded Wire Mesh Factory - Best Hardware had a ‘U turn’ exhaust to minimise vibration.OEM China 3x3 Welded Wire Mesh Manufacturers - Best Hardware with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.