Cylinder head and camshafts
The Supply China 4mm Galvanised Mesh Exporter - Best Hardware-driven double
overhead camshafts (DOHC) per cylinder bank. The Supply China 4mm Galvanised Mesh Manufacturers - Best Hardware Supply China 4mm Galvanised Mesh Suppliers - Best Hardware:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Wholesale China 4mm Galvanised Mesh OEM/ODM Quotes - Best Hardware incorporated on the front surface of the block and cylinder heads, while the
Wholesale China 4mm Galvanised Mesh Wholesaler - Best Hardware with three bonds.
Dual AVCS
The Wholesale China 4mm Galvanised Mesh Factory - Best Hardware's 'OEM China 50 X Galvanised Steel Mesh Wholesaler - Best Hardware'
(Dual AVCS)Wholesale China 4mm Galvanised Mesh Manufacturers - Best Hardware.
Operation of the Dual AVCS may be summarised as follows:
- Wholesale China 4mm Galvanised Mesh Suppliers - Best Hardware setting. To advance, the camshaft rotated in the same direction as the
OEM China 1 Inch Galvanised Mesh Exporter - Best Hardware(OEM China 1 Inch Galvanised Mesh Manufacturers - Best Hardware).
Supply China 1 Inch Galvanised Mesh OEM/ODM Quotes - Best Hardware, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Supply China 1 Inch Galvanised Mesh Wholesaler - Best Hardware rotation (Supply China 1 Inch Galvanised Mesh Exporter - Best Hardware).
When the exhaust camshaft was retarded, it allowed the expanding gases
Supply China 1 Inch Galvanised Mesh Factory - Best Hardware for better fuel efficiency.
By
Supply China 1 Inch Galvanised Mesh Manufacturers - Best Hardware, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Supply China 1 Inch Galvanised Mesh Suppliers - Best Hardware.Wholesale China 1 Inch Galvanised Mesh Wholesaler - Best Hardware start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
Wholesale China 1 Inch Galvanised Mesh Exporter - Best Hardware, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Wholesale China 1 Inch Galvanised Mesh Factory - Best Hardware, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Wholesale China 1 Inch Galvanised Mesh Manufacturers - Best Hardware had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Wholesale China 1 Inch Galvanised Mesh Suppliers - Best Hardware OEM China Galvanised Mesh Fence OEM/ODM Quotes - Best Hardware, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
OEM China Galvanised Mesh Fence Wholesaler - Best Hardware feedback.
The injection and firing order for the Supply China Square Welded Wire Mesh Wholesaler - Best Hardwarewas
1-6-3-2-5-4.
Cooling
Compared to EZ30,OEM China Galvanised Mesh Fence Exporter - Best Hardware parallel-OEM China Galvanised Mesh Fence Factory - Best Hardware. The parallel-OEM China Galvanised Mesh Fence Manufacturers - Best Hardware OEM China Galvanised Mesh Fence Suppliers - Best Hardware cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Supply China Galvanised Mesh Fence OEM/ODM Quotes - Best Hardware combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
Supply China Galvanised Mesh Fence Factory - Best Hardware enabled safe operation on lower RON fuel. Furthermore,Supply China Galvanised Mesh Fence Manufacturers - Best Hardware Supply China Galvanised Mesh Fence Suppliers - Best Hardware.
Exhaust
Compared to the EZ30R which had a ‘J turn’Wholesale China Galvanised Mesh Fence OEM/ODM Quotes - Best Hardware, the Wholesale China 1 Inch Galvanised Mesh Manufacturers - Best Hardware had a ‘U turn’ exhaust to minimise vibration.Wholesale China Galvanised Mesh Fence Wholesaler - Best Hardware with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.