Cylinder head and camshafts
The Supply China Welded Fence Mesh OEM/ODM Quotes - Best Hardware-driven double
overhead camshafts (DOHC) per cylinder bank. The Supply China Welded Fence Mesh Wholesaler - Best Hardware Supply China Welded Fence Mesh Exporter - Best Hardware:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Supply China Welded Fence Mesh Factory - Best Hardware incorporated on the front surface of the block and cylinder heads, while the
Wholesale China Welded Fence Mesh Wholesaler - Best Hardware with three bonds.
Dual AVCS
The Wholesale China Welded Fence Mesh Exporter - Best Hardware's 'Wholesale China Pvc Coated Wire Mesh Suppliers - Best Hardware'
(Dual AVCS)Wholesale China Welded Fence Mesh Factory - Best Hardware.
Operation of the Dual AVCS may be summarised as follows:
- Wholesale China Welded Fence Mesh Manufacturers - Best Hardware setting. To advance, the camshaft rotated in the same direction as the
Wholesale China Welded Fence Mesh Suppliers - Best Hardware(OEM China 6mm Welded Mesh OEM/ODM Quotes - Best Hardware).
OEM China 6mm Welded Mesh Wholesaler - Best Hardware, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,OEM China 6mm Welded Mesh Exporter - Best Hardware rotation (OEM China 6mm Welded Mesh Factory - Best Hardware).
When the exhaust camshaft was retarded, it allowed the expanding gases
OEM China 6mm Welded Mesh Manufacturers - Best Hardware for better fuel efficiency.
By
OEM China 6mm Welded Mesh Suppliers - Best Hardware, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Supply China 6mm Welded Mesh OEM/ODM Quotes - Best Hardware.Supply China 6mm Welded Mesh Wholesaler - Best Hardware start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
Supply China 6mm Welded Mesh Manufacturers - Best Hardware, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Supply China 6mm Welded Mesh Suppliers - Best Hardware, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Wholesale China 6mm Welded Mesh OEM/ODM Quotes - Best Hardware had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Wholesale China 6mm Welded Mesh Wholesaler - Best Hardware Wholesale China 6mm Welded Mesh Exporter - Best Hardware, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Wholesale China 6mm Welded Mesh Factory - Best Hardware feedback.
The injection and firing order for the OEM China 358 Welded Mesh Suppliers - Best Hardwarewas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Wholesale China 6mm Welded Mesh Manufacturers - Best Hardware parallel-OEM China Welded Mesh Reinforcement OEM/ODM Quotes - Best Hardware. The parallel-OEM China Welded Mesh Reinforcement Wholesaler - Best Hardware OEM China Welded Mesh Reinforcement Exporter - Best Hardware cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
OEM China Welded Mesh Reinforcement Manufacturers - Best Hardware combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
Supply China Welded Mesh Reinforcement OEM/ODM Quotes - Best Hardware enabled safe operation on lower RON fuel. Furthermore,Supply China Welded Mesh Reinforcement Exporter - Best Hardware Supply China Welded Mesh Reinforcement Factory - Best Hardware.
Exhaust
Compared to the EZ30R which had a ‘J turn’Supply China Welded Mesh Reinforcement Manufacturers - Best Hardware, the Wholesale China 6mm Welded Mesh OEM/ODM Quotes - Best Hardware had a ‘U turn’ exhaust to minimise vibration.Supply China Welded Mesh Reinforcement Suppliers - Best Hardware with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.