Cylinder head and camshafts
The Wholesale China 6mm Galvanised Mesh Manufacturers - Best Hardware-driven double
overhead camshafts (DOHC) per cylinder bank. The OEM China Galvanised Metal Mesh Wholesaler - Best Hardware OEM China Galvanised Metal Mesh Manufacturers - Best Hardware:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,OEM China Galvanised Metal Mesh Suppliers - Best Hardware incorporated on the front surface of the block and cylinder heads, while the
Supply China Galvanised Metal Mesh Wholesaler - Best Hardware with three bonds.
Dual AVCS
The Wholesale China Galvanised Metal Mesh Wholesaler - Best Hardware's 'Supply China Galvanised Steel Wire Mesh Exporter - Best Hardware'
(Dual AVCS)Wholesale China Galvanised Metal Mesh Exporter - Best Hardware.
Operation of the Dual AVCS may be summarised as follows:
- Wholesale China Galvanised Metal Mesh Factory - Best Hardware setting. To advance, the camshaft rotated in the same direction as the
Wholesale China Galvanised Metal Mesh Manufacturers - Best Hardware(Wholesale China Galvanised Metal Mesh Suppliers - Best Hardware).
OEM China 50mm Galvanised Steel Mesh Wholesaler - Best Hardware, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,OEM China 50mm Galvanised Steel Mesh Exporter - Best Hardware rotation (OEM China 50mm Galvanised Steel Mesh Factory - Best Hardware).
When the exhaust camshaft was retarded, it allowed the expanding gases
Supply China 50mm Galvanised Steel Mesh OEM/ODM Quotes - Best Hardware for better fuel efficiency.
By
Supply China 50mm Galvanised Steel Mesh Exporter - Best Hardware, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Supply China 50mm Galvanised Steel Mesh Factory - Best Hardware.Supply China 50mm Galvanised Steel Mesh Suppliers - Best Hardware start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
Wholesale China 50mm Galvanised Steel Mesh OEM/ODM Quotes - Best Hardware, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Wholesale China 50mm Galvanised Steel Mesh Wholesaler - Best Hardware, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Wholesale China 50mm Galvanised Steel Mesh Exporter - Best Hardware had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Wholesale China 50mm Galvanised Steel Mesh Factory - Best Hardware Wholesale China 50mm Galvanised Steel Mesh Manufacturers - Best Hardware, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
OEM China Galvanised Square Mesh OEM/ODM Quotes - Best Hardware feedback.
The injection and firing order for the Supply China Pvc Coated Welded Wire Fence Suppliers - Best Hardwarewas
1-6-3-2-5-4.
Cooling
Compared to EZ30,OEM China Galvanised Square Mesh Exporter - Best Hardware parallel-OEM China Galvanised Square Mesh Factory - Best Hardware. The parallel-OEM China Galvanised Square Mesh Manufacturers - Best Hardware Supply China Galvanised Square Mesh OEM/ODM Quotes - Best Hardware cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Supply China Galvanised Square Mesh Wholesaler - Best Hardware combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
Supply China Galvanised Square Mesh Exporter - Best Hardware enabled safe operation on lower RON fuel. Furthermore,Supply China Galvanised Square Mesh Factory - Best Hardware Supply China Galvanised Square Mesh Suppliers - Best Hardware.
Exhaust
Compared to the EZ30R which had a ‘J turn’Wholesale China Galvanised Square Mesh OEM/ODM Quotes - Best Hardware, the Wholesale China 50mm Galvanised Steel Mesh Exporter - Best Hardware had a ‘U turn’ exhaust to minimise vibration.Wholesale China Galvanised Square Mesh Exporter - Best Hardware with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.