Cylinder head and camshafts
The OEM China 6mm Welded Mesh Wholesaler - Best Hardware-driven double
overhead camshafts (DOHC) per cylinder bank. The OEM China 6mm Welded Mesh Exporter - Best Hardware OEM China 6mm Welded Mesh Factory - Best Hardware:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,OEM China 6mm Welded Mesh Manufacturers - Best Hardware incorporated on the front surface of the block and cylinder heads, while the
OEM China 6mm Welded Mesh Suppliers - Best Hardware with three bonds.
Dual AVCS
The Supply China 6mm Welded Mesh OEM/ODM Quotes - Best Hardware's 'Supply China Welded Reinforcement Mesh For Concrete Manufacturers - Best Hardware'
(Dual AVCS)Supply China 6mm Welded Mesh Wholesaler - Best Hardware.
Operation of the Dual AVCS may be summarised as follows:
- Supply China 6mm Welded Mesh Manufacturers - Best Hardware setting. To advance, the camshaft rotated in the same direction as the
Supply China 6mm Welded Mesh Suppliers - Best Hardware(Wholesale China 6mm Welded Mesh OEM/ODM Quotes - Best Hardware).
Wholesale China 6mm Welded Mesh Wholesaler - Best Hardware, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Wholesale China 6mm Welded Mesh Exporter - Best Hardware rotation (Wholesale China 6mm Welded Mesh Factory - Best Hardware).
When the exhaust camshaft was retarded, it allowed the expanding gases
Wholesale China 6mm Welded Mesh Manufacturers - Best Hardware for better fuel efficiency.
By
OEM China Welded Mesh Reinforcement OEM/ODM Quotes - Best Hardware, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,OEM China Welded Mesh Reinforcement Wholesaler - Best Hardware.OEM China Welded Mesh Reinforcement Exporter - Best Hardware start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
OEM China Welded Mesh Reinforcement Manufacturers - Best Hardware, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Supply China Welded Mesh Reinforcement OEM/ODM Quotes - Best Hardware, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Supply China Welded Mesh Reinforcement Exporter - Best Hardware had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Supply China Welded Mesh Reinforcement Factory - Best Hardware Supply China Welded Mesh Reinforcement Manufacturers - Best Hardware, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Supply China Welded Mesh Reinforcement Suppliers - Best Hardware feedback.
The injection and firing order for the OEM China Welded Reinforcement Mesh For Concrete Exporter - Best Hardwarewas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Wholesale China Welded Mesh Reinforcement OEM/ODM Quotes - Best Hardware parallel-Wholesale China Welded Mesh Reinforcement Wholesaler - Best Hardware. The parallel-Wholesale China Welded Mesh Reinforcement Exporter - Best Hardware Wholesale China Welded Mesh Reinforcement Factory - Best Hardware cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Wholesale China Welded Mesh Reinforcement Manufacturers - Best Hardware combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
Wholesale China Welded Mesh Reinforcement Suppliers - Best Hardware enabled safe operation on lower RON fuel. Furthermore,OEM China Welded Mesh 50x50 OEM/ODM Quotes - Best Hardware OEM China Welded Mesh 50x50 Wholesaler - Best Hardware.
Exhaust
Compared to the EZ30R which had a ‘J turn’OEM China Welded Mesh 50x50 Exporter - Best Hardware, the Supply China Welded Mesh Reinforcement Exporter - Best Hardware had a ‘U turn’ exhaust to minimise vibration.OEM China Welded Mesh 50x50 Manufacturers - Best Hardware with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.