Cylinder head and camshafts
The Wholesale China 2x2 Welded Wire Mesh Factory - Best Hardware-driven double
overhead camshafts (DOHC) per cylinder bank. The Wholesale China 2x2 Welded Wire Mesh Suppliers - Best Hardware OEM China Vinyl Coated Welded Wire Mesh Factory - Best Hardware:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,OEM China Vinyl Coated Welded Wire Mesh Manufacturers - Best Hardware incorporated on the front surface of the block and cylinder heads, while the
OEM China Vinyl Coated Welded Wire Mesh Suppliers - Best Hardware with three bonds.
Dual AVCS
The Supply China Vinyl Coated Welded Wire Mesh Exporter - Best Hardware's 'OEM China Welded Wire Mesh Fencing Suppliers - Best Hardware'
(Dual AVCS)Supply China Vinyl Coated Welded Wire Mesh Factory - Best Hardware.
Operation of the Dual AVCS may be summarised as follows:
- Supply China Vinyl Coated Welded Wire Mesh Manufacturers - Best Hardware setting. To advance, the camshaft rotated in the same direction as the
Supply China Vinyl Coated Welded Wire Mesh Suppliers - Best Hardware(Wholesale China Vinyl Coated Welded Wire Mesh Exporter - Best Hardware).
Wholesale China Vinyl Coated Welded Wire Mesh Factory - Best Hardware, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Wholesale China Vinyl Coated Welded Wire Mesh Suppliers - Best Hardware rotation (OEM China Galvanized Welded Wire Mesh Rolls OEM/ODM Quotes - Best Hardware).
When the exhaust camshaft was retarded, it allowed the expanding gases
OEM China Galvanized Welded Wire Mesh Rolls Wholesaler - Best Hardware for better fuel efficiency.
By
OEM China Galvanized Welded Wire Mesh Rolls Exporter - Best Hardware, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Supply China Galvanized Welded Wire Mesh Rolls Exporter - Best Hardware.Supply China Galvanized Welded Wire Mesh Rolls Factory - Best Hardware start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
Supply China Galvanized Welded Wire Mesh Rolls Manufacturers - Best Hardware, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Wholesale China Galvanized Welded Wire Mesh Rolls Exporter - Best Hardware, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Wholesale China Galvanized Welded Wire Mesh Rolls Factory - Best Hardware had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Wholesale China Galvanized Welded Wire Mesh Rolls Manufacturers - Best Hardware Wholesale China Galvanized Welded Wire Mesh Rolls Suppliers - Best Hardware, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
OEM China Welded Wire Mesh Sizes For Concrete OEM/ODM Quotes - Best Hardware feedback.
The injection and firing order for the Supply China Mosquito Net Doors And Windows Factory - Best Hardwarewas
1-6-3-2-5-4.
Cooling
Compared to EZ30,OEM China Welded Wire Mesh Sizes For Concrete Wholesaler - Best Hardware parallel-OEM China Welded Wire Mesh Sizes For Concrete Exporter - Best Hardware. The parallel-OEM China Welded Wire Mesh Sizes For Concrete Factory - Best Hardware OEM China Welded Wire Mesh Sizes For Concrete Suppliers - Best Hardware cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Supply China Welded Wire Mesh Sizes For Concrete OEM/ODM Quotes - Best Hardware combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
Supply China Welded Wire Mesh Sizes For Concrete Wholesaler - Best Hardware enabled safe operation on lower RON fuel. Furthermore,Supply China Welded Wire Mesh Sizes For Concrete Exporter - Best Hardware Supply China Welded Wire Mesh Sizes For Concrete Factory - Best Hardware.
Exhaust
Compared to the EZ30R which had a ‘J turn’Supply China Welded Wire Mesh Sizes For Concrete Manufacturers - Best Hardware, the Wholesale China Galvanized Welded Wire Mesh Rolls Factory - Best Hardware had a ‘U turn’ exhaust to minimise vibration.Supply China Welded Wire Mesh Sizes For Concrete Suppliers - Best Hardware with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.