Cylinder head and camshafts
The OEM China 2x2 Galvanized Wire Mesh Factory - Best Hardware-driven double
overhead camshafts (DOHC) per cylinder bank. The OEM China 2x2 Galvanized Wire Mesh Manufacturers - Best Hardware Supply China 2x2 Galvanized Wire Mesh OEM/ODM Quotes - Best Hardware:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Supply China 2x2 Galvanized Wire Mesh Exporter - Best Hardware incorporated on the front surface of the block and cylinder heads, while the
Supply China 2x2 Galvanized Wire Mesh Factory - Best Hardware with three bonds.
Dual AVCS
The Supply China 2x2 Galvanized Wire Mesh Manufacturers - Best Hardware's 'Wholesale China Galvanized Wire Mesh Fence Exporter - Best Hardware'
(Dual AVCS)Supply China 2x2 Galvanized Wire Mesh Suppliers - Best Hardware.
Operation of the Dual AVCS may be summarised as follows:
- Wholesale China 2x2 Galvanized Wire Mesh OEM/ODM Quotes - Best Hardware setting. To advance, the camshaft rotated in the same direction as the
Wholesale China 2x2 Galvanized Wire Mesh Exporter - Best Hardware(Wholesale China 2x2 Galvanized Wire Mesh Manufacturers - Best Hardware).
Wholesale China 2x2 Galvanized Wire Mesh Suppliers - Best Hardware, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,OEM China Non Galvanized Wire Mesh OEM/ODM Quotes - Best Hardware rotation (OEM China Non Galvanized Wire Mesh Wholesaler - Best Hardware).
When the exhaust camshaft was retarded, it allowed the expanding gases
OEM China Non Galvanized Wire Mesh Factory - Best Hardware for better fuel efficiency.
By
OEM China Non Galvanized Wire Mesh Manufacturers - Best Hardware, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,OEM China Non Galvanized Wire Mesh Suppliers - Best Hardware.Supply China Non Galvanized Wire Mesh OEM/ODM Quotes - Best Hardware start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
Supply China Non Galvanized Wire Mesh Wholesaler - Best Hardware, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Supply China Non Galvanized Wire Mesh Exporter - Best Hardware, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Supply China Non Galvanized Wire Mesh Factory - Best Hardware had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Supply China Non Galvanized Wire Mesh Manufacturers - Best Hardware Supply China Non Galvanized Wire Mesh Suppliers - Best Hardware, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Wholesale China Non Galvanized Wire Mesh OEM/ODM Quotes - Best Hardware feedback.
The injection and firing order for the OEM China Coated Welded Wire Mesh Exporter - Best Hardwarewas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Wholesale China Non Galvanized Wire Mesh Wholesaler - Best Hardware parallel-Wholesale China Non Galvanized Wire Mesh Exporter - Best Hardware. The parallel-Wholesale China Non Galvanized Wire Mesh Manufacturers - Best Hardware Wholesale China Non Galvanized Wire Mesh Suppliers - Best Hardware cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
OEM China Galvanized Wire Mesh Panels OEM/ODM Quotes - Best Hardware combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
OEM China Galvanized Wire Mesh Panels Wholesaler - Best Hardware enabled safe operation on lower RON fuel. Furthermore,OEM China Galvanized Wire Mesh Panels Exporter - Best Hardware OEM China Galvanized Wire Mesh Panels Factory - Best Hardware.
Exhaust
Compared to the EZ30R which had a ‘J turn’OEM China Galvanized Wire Mesh Panels Suppliers - Best Hardware, the Supply China Non Galvanized Wire Mesh Factory - Best Hardware had a ‘U turn’ exhaust to minimise vibration.Supply China Galvanized Wire Mesh Panels Exporter - Best Hardware with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.