Cylinder head and camshafts
The Supply China Fence Welded Mesh Wholesaler - Best Hardware-driven double
overhead camshafts (DOHC) per cylinder bank. The Supply China Fence Welded Mesh Factory - Best Hardware Supply China Fence Welded Mesh Manufacturers - Best Hardware:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Wholesale China Fence Welded Mesh Exporter - Best Hardware incorporated on the front surface of the block and cylinder heads, while the
Wholesale China Fence Welded Mesh Factory - Best Hardware with three bonds.
Dual AVCS
The Wholesale China Fence Welded Mesh Manufacturers - Best Hardware's 'Wholesale China Mild Steel Welded Mesh Exporter - Best Hardware'
(Dual AVCS)Wholesale China Fence Welded Mesh Suppliers - Best Hardware.
Operation of the Dual AVCS may be summarised as follows:
- OEM China 358 Welded Mesh Wholesaler - Best Hardware setting. To advance, the camshaft rotated in the same direction as the
OEM China 358 Welded Mesh Exporter - Best Hardware(OEM China 358 Welded Mesh Manufacturers - Best Hardware).
OEM China 358 Welded Mesh Suppliers - Best Hardware, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Supply China 358 Welded Mesh Wholesaler - Best Hardware rotation (Supply China 358 Welded Mesh Exporter - Best Hardware).
When the exhaust camshaft was retarded, it allowed the expanding gases
Supply China 358 Welded Mesh Manufacturers - Best Hardware for better fuel efficiency.
By
Supply China 358 Welded Mesh Suppliers - Best Hardware, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Wholesale China 358 Welded Mesh Factory - Best Hardware.Wholesale China 358 Welded Mesh Suppliers - Best Hardware start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
OEM China Pvc Coated Welded Mesh Exporter - Best Hardware, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The OEM China Pvc Coated Welded Mesh Factory - Best Hardware, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Supply China Pvc Coated Welded Mesh OEM/ODM Quotes - Best Hardware had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Supply China Pvc Coated Welded Mesh Wholesaler - Best Hardware Wholesale China Pvc Coated Welded Mesh OEM/ODM Quotes - Best Hardware, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Wholesale China Pvc Coated Welded Mesh Wholesaler - Best Hardware feedback.
The injection and firing order for the OEM China 2 Inch Square Wire Mesh Suppliers - Best Hardwarewas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Wholesale China Pvc Coated Welded Mesh Exporter - Best Hardware parallel-Wholesale China Pvc Coated Welded Mesh Factory - Best Hardware. The parallel-Wholesale China Pvc Coated Welded Mesh Manufacturers - Best Hardware Wholesale China Pvc Coated Welded Mesh Suppliers - Best Hardware cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
OEM China Welded Metal Mesh Factory - Best Hardware combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
OEM China Welded Metal Mesh Manufacturers - Best Hardware enabled safe operation on lower RON fuel. Furthermore,OEM China Welded Metal Mesh Suppliers - Best Hardware Supply China Welded Metal Mesh OEM/ODM Quotes - Best Hardware.
Exhaust
Compared to the EZ30R which had a ‘J turn’Supply China Welded Metal Mesh Wholesaler - Best Hardware, the Supply China Pvc Coated Welded Mesh OEM/ODM Quotes - Best Hardware had a ‘U turn’ exhaust to minimise vibration.Supply China Welded Metal Mesh Exporter - Best Hardware with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.