Cylinder head and camshafts
The Wholesale China 50 X Galvanised Steel Mesh Exporter - Best Hardware-driven double
overhead camshafts (DOHC) per cylinder bank. The Wholesale China 50 X Galvanised Steel Mesh Factory - Best Hardware Wholesale China 50 X Galvanised Steel Mesh Manufacturers - Best Hardware:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,OEM China 4mm Galvanised Mesh Exporter - Best Hardware incorporated on the front surface of the block and cylinder heads, while the
OEM China 4mm Galvanised Mesh Factory - Best Hardware with three bonds.
Dual AVCS
The OEM China 4mm Galvanised Mesh Manufacturers - Best Hardware's 'Supply China Galvanised Mesh Fence Panels Wholesaler - Best Hardware'
(Dual AVCS)OEM China 4mm Galvanised Mesh Suppliers - Best Hardware.
Operation of the Dual AVCS may be summarised as follows:
- Supply China 4mm Galvanised Mesh OEM/ODM Quotes - Best Hardware setting. To advance, the camshaft rotated in the same direction as the
Supply China 4mm Galvanised Mesh Wholesaler - Best Hardware(Supply China 4mm Galvanised Mesh Exporter - Best Hardware).
Supply China 4mm Galvanised Mesh Manufacturers - Best Hardware, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Supply China 4mm Galvanised Mesh Suppliers - Best Hardware rotation (Wholesale China 4mm Galvanised Mesh OEM/ODM Quotes - Best Hardware).
When the exhaust camshaft was retarded, it allowed the expanding gases
Wholesale China 4mm Galvanised Mesh Wholesaler - Best Hardware for better fuel efficiency.
By
Wholesale China 4mm Galvanised Mesh Factory - Best Hardware, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Wholesale China 4mm Galvanised Mesh Manufacturers - Best Hardware.Wholesale China 4mm Galvanised Mesh Suppliers - Best Hardware start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
OEM China 1 Inch Galvanised Mesh Exporter - Best Hardware, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The OEM China 1 Inch Galvanised Mesh Manufacturers - Best Hardware, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Supply China 1 Inch Galvanised Mesh OEM/ODM Quotes - Best Hardware had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Supply China 1 Inch Galvanised Mesh Wholesaler - Best Hardware Supply China 1 Inch Galvanised Mesh Exporter - Best Hardware, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Supply China 1 Inch Galvanised Mesh Factory - Best Hardware feedback.
The injection and firing order for the Supply China Steel Mesh Coffee Filter Manufacturers - Best Hardwarewas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Supply China 1 Inch Galvanised Mesh Manufacturers - Best Hardware parallel-Supply China 1 Inch Galvanised Mesh Suppliers - Best Hardware. The parallel-Wholesale China 1 Inch Galvanised Mesh Wholesaler - Best Hardware Wholesale China 1 Inch Galvanised Mesh Exporter - Best Hardware cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Wholesale China 1 Inch Galvanised Mesh Factory - Best Hardware combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
Wholesale China 1 Inch Galvanised Mesh Manufacturers - Best Hardware enabled safe operation on lower RON fuel. Furthermore,Wholesale China 1 Inch Galvanised Mesh Suppliers - Best Hardware OEM China Galvanised Mesh Fence OEM/ODM Quotes - Best Hardware.
Exhaust
Compared to the EZ30R which had a ‘J turn’OEM China Galvanised Mesh Fence Wholesaler - Best Hardware, the Supply China 1 Inch Galvanised Mesh OEM/ODM Quotes - Best Hardware had a ‘U turn’ exhaust to minimise vibration.OEM China Galvanised Mesh Fence Exporter - Best Hardware with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.