Cylinder head and camshafts
The Wholesale China 50x50 Galvanised Mesh Factory - Best Hardware-driven double
overhead camshafts (DOHC) per cylinder bank. The Wholesale China 50x50 Galvanised Mesh Manufacturers - Best Hardware Wholesale China 50x50 Galvanised Mesh Suppliers - Best Hardware:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,OEM China Galvanised Wire Mesh Panels OEM/ODM Quotes - Best Hardware incorporated on the front surface of the block and cylinder heads, while the
OEM China Galvanised Wire Mesh Panels Wholesaler - Best Hardware with three bonds.
Dual AVCS
The OEM China Galvanised Wire Mesh Panels Factory - Best Hardware's 'OEM China Galvanised Square Mesh Manufacturers - Best Hardware'
(Dual AVCS)OEM China Galvanised Wire Mesh Panels Manufacturers - Best Hardware.
Operation of the Dual AVCS may be summarised as follows:
- Supply China Galvanised Wire Mesh Panels Wholesaler - Best Hardware setting. To advance, the camshaft rotated in the same direction as the
Supply China Galvanised Wire Mesh Panels Exporter - Best Hardware(Supply China Galvanised Wire Mesh Panels Manufacturers - Best Hardware).
Supply China Galvanised Wire Mesh Panels Suppliers - Best Hardware, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Wholesale China Galvanised Wire Mesh Panels Wholesaler - Best Hardware rotation (Wholesale China Galvanised Wire Mesh Panels Exporter - Best Hardware).
When the exhaust camshaft was retarded, it allowed the expanding gases
Wholesale China Galvanised Wire Mesh Panels Factory - Best Hardware for better fuel efficiency.
By
Wholesale China Galvanised Wire Mesh Panels Manufacturers - Best Hardware, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Wholesale China Galvanised Wire Mesh Panels Suppliers - Best Hardware.OEM China Galvanised Weld Mesh Sheet Suppliers - Best Hardware start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
Supply China Galvanised Weld Mesh Sheet OEM/ODM Quotes - Best Hardware, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Supply China Galvanised Weld Mesh Sheet Wholesaler - Best Hardware, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Supply China Galvanised Weld Mesh Sheet Exporter - Best Hardware had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Supply China Galvanised Weld Mesh Sheet Factory - Best Hardware Supply China Galvanised Weld Mesh Sheet Suppliers - Best Hardware, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Wholesale China Galvanised Weld Mesh Sheet OEM/ODM Quotes - Best Hardware feedback.
The injection and firing order for the OEM China Mosquito Net For Windows Cost OEM/ODM Quotes - Best Hardwarewas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Wholesale China Galvanised Weld Mesh Sheet Wholesaler - Best Hardware parallel-Wholesale China Galvanised Weld Mesh Sheet Factory - Best Hardware. The parallel-Wholesale China Galvanised Weld Mesh Sheet Suppliers - Best Hardware OEM China Galvanised Mesh Fencing OEM/ODM Quotes - Best Hardware cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
OEM China Galvanised Mesh Fencing Wholesaler - Best Hardware combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
OEM China Galvanised Mesh Fencing Factory - Best Hardware enabled safe operation on lower RON fuel. Furthermore,OEM China Galvanised Mesh Fencing Manufacturers - Best Hardware OEM China Galvanised Mesh Fencing Suppliers - Best Hardware.
Exhaust
Compared to the EZ30R which had a ‘J turn’Supply China Galvanised Mesh Fencing OEM/ODM Quotes - Best Hardware, the Supply China Galvanised Weld Mesh Sheet Exporter - Best Hardware had a ‘U turn’ exhaust to minimise vibration.Supply China Galvanised Mesh Fencing Wholesaler - Best Hardware with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.