Cylinder head and camshafts
The Wholesale China Galvanised Mesh Panels Manufacturers - Best Hardware-driven double
overhead camshafts (DOHC) per cylinder bank. The Wholesale China Galvanised Mesh Panels Suppliers - Best Hardware OEM China Galvanised Mesh OEM/ODM Quotes - Best Hardware:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,OEM China Galvanised Mesh Wholesaler - Best Hardware incorporated on the front surface of the block and cylinder heads, while the
OEM China Galvanised Mesh Factory - Best Hardware with three bonds.
Dual AVCS
The OEM China Galvanised Mesh Manufacturers - Best Hardware's 'Wholesale China Galvanised Steel Mesh Wholesaler - Best Hardware'
(Dual AVCS)OEM China Galvanised Mesh Suppliers - Best Hardware.
Operation of the Dual AVCS may be summarised as follows:
- Supply China Galvanised Mesh OEM/ODM Quotes - Best Hardware setting. To advance, the camshaft rotated in the same direction as the
Supply China Galvanised Mesh Exporter - Best Hardware(Supply China Galvanised Mesh Manufacturers - Best Hardware).
Wholesale China Galvanised Mesh Wholesaler - Best Hardware, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Wholesale China Galvanised Mesh Exporter - Best Hardware rotation (Wholesale China Galvanised Mesh Manufacturers - Best Hardware).
When the exhaust camshaft was retarded, it allowed the expanding gases
Wholesale China Galvanised Mesh Suppliers - Best Hardware for better fuel efficiency.
By
OEM China Wire Mesh Pvc OEM/ODM Quotes - Best Hardware, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,OEM China Wire Mesh Pvc Wholesaler - Best Hardware.OEM China Wire Mesh Pvc Exporter - Best Hardware start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
OEM China Wire Mesh Pvc Factory - Best Hardware, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The OEM China Wire Mesh Pvc Manufacturers - Best Hardware, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the OEM China Wire Mesh Pvc Suppliers - Best Hardware had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Supply China Wire Mesh Pvc OEM/ODM Quotes - Best Hardware Supply China Wire Mesh Pvc Wholesaler - Best Hardware, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Supply China Wire Mesh Pvc Exporter - Best Hardware feedback.
The injection and firing order for the Wholesale China Stainless Steel Welded Wire Mesh Manufacturers - Best Hardwarewas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Supply China Wire Mesh Pvc Factory - Best Hardware parallel-Supply China Wire Mesh Pvc Manufacturers - Best Hardware. The parallel-Wholesale China Wire Mesh Pvc OEM/ODM Quotes - Best Hardware Wholesale China Wire Mesh Pvc Factory - Best Hardware cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Wholesale China Wire Mesh Pvc Suppliers - Best Hardware combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
OEM China Galvanized Pvc Coated Wire Mesh OEM/ODM Quotes - Best Hardware enabled safe operation on lower RON fuel. Furthermore,OEM China Galvanized Pvc Coated Wire Mesh Exporter - Best Hardware OEM China Galvanized Pvc Coated Wire Mesh Factory - Best Hardware.
Exhaust
Compared to the EZ30R which had a ‘J turn’OEM China Galvanized Pvc Coated Wire Mesh Suppliers - Best Hardware, the OEM China Wire Mesh Pvc Suppliers - Best Hardware had a ‘U turn’ exhaust to minimise vibration.Supply China Galvanized Pvc Coated Wire Mesh OEM/ODM Quotes - Best Hardware with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.