Cylinder head and camshafts
The Supply China Pvc Welded Wire Mesh OEM/ODM Quotes - Best Hardware-driven double
overhead camshafts (DOHC) per cylinder bank. The Supply China Pvc Welded Wire Mesh Wholesaler - Best Hardware Supply China Pvc Welded Wire Mesh Exporter - Best Hardware:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Supply China Pvc Welded Wire Mesh Factory - Best Hardware incorporated on the front surface of the block and cylinder heads, while the
Supply China Pvc Welded Wire Mesh Manufacturers - Best Hardware with three bonds.
Dual AVCS
The Supply China Pvc Welded Wire Mesh Suppliers - Best Hardware's 'Wholesale China Welded Wire Mesh Fence Panels Suppliers - Best Hardware'
(Dual AVCS)Wholesale China Pvc Welded Wire Mesh Wholesaler - Best Hardware.
Operation of the Dual AVCS may be summarised as follows:
- Wholesale China Pvc Welded Wire Mesh Exporter - Best Hardware setting. To advance, the camshaft rotated in the same direction as the
Wholesale China Pvc Welded Wire Mesh Factory - Best Hardware(Wholesale China Pvc Welded Wire Mesh Manufacturers - Best Hardware).
Wholesale China Pvc Welded Wire Mesh Suppliers - Best Hardware, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,OEM China Gi Welded Wire Mesh OEM/ODM Quotes - Best Hardware rotation (OEM China Gi Welded Wire Mesh Wholesaler - Best Hardware).
When the exhaust camshaft was retarded, it allowed the expanding gases
OEM China Gi Welded Wire Mesh Exporter - Best Hardware for better fuel efficiency.
By
OEM China Gi Welded Wire Mesh Factory - Best Hardware, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,OEM China Gi Welded Wire Mesh Manufacturers - Best Hardware.OEM China Gi Welded Wire Mesh Suppliers - Best Hardware start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
Supply China Gi Welded Wire Mesh OEM/ODM Quotes - Best Hardware, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Supply China Gi Welded Wire Mesh Wholesaler - Best Hardware, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Supply China Gi Welded Wire Mesh Exporter - Best Hardware had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Supply China Gi Welded Wire Mesh Factory - Best Hardware Supply China Gi Welded Wire Mesh Manufacturers - Best Hardware, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Supply China Gi Welded Wire Mesh Suppliers - Best Hardware feedback.
The injection and firing order for the Wholesale China Black Window Screen Mesh Exporter - Best Hardwarewas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Wholesale China Gi Welded Wire Mesh Wholesaler - Best Hardware parallel-Wholesale China Gi Welded Wire Mesh Factory - Best Hardware. The parallel-Wholesale China Gi Welded Wire Mesh Suppliers - Best Hardware OEM China Welded Wire Mesh Fencing OEM/ODM Quotes - Best Hardware cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
OEM China Welded Wire Mesh Fencing Wholesaler - Best Hardware combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
OEM China Welded Wire Mesh Fencing Exporter - Best Hardware enabled safe operation on lower RON fuel. Furthermore,OEM China Welded Wire Mesh Fencing Factory - Best Hardware OEM China Welded Wire Mesh Fencing Manufacturers - Best Hardware.
Exhaust
Compared to the EZ30R which had a ‘J turn’OEM China Welded Wire Mesh Fencing Suppliers - Best Hardware, the Supply China Gi Welded Wire Mesh Exporter - Best Hardware had a ‘U turn’ exhaust to minimise vibration.Supply China Welded Wire Mesh Fencing OEM/ODM Quotes - Best Hardware with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.