Digital Signage For Restaurant | OEM/ODM - ASANOblock
The Multi Touch Interactive Board | Price - ASANO-cast aluminium alloy cylinder block with 92.0 mm
bores and a 75.0 mm stroke for a capacity of 1994 cc. The cylinder block had
an open-Multi Touch Interactive Board | Manufacturers - ASANO-type, cast iron
cylinder liners (the outer surfaces of ‘dry type’ liners are in complete
contact with the cylinder walls).
Crankshaft,Multi Touch Interactive Board | Factory - ASANO
For the Touch Screen Board | Manufacturers - ASANO, the crankshaft was supported by five bearings that
were made from aluminium alloy.Multi Touch Interactive Board | Suppliers - ASANO,
the crankshaft thrust bearing was relocated to the rear of the crankshaft
(previously the no. 3 bearing).
The Smart Touch Board | OEM/ODM - ASANO Smart Touch Board | Price - ASANO. For the EJ
Smart Touch Board | Manufacturers - ASANO,Smart Touch Board | Factory - ASANO:
- Smart Touch Board | Suppliers - ASANO;
- Ir Touch Smart Board | OEM/ODM - ASANO;
- Molybdenum coating; and,
- Reduced top land to cylinder clearance.
Ir Touch Smart Board | Price - ASANOIr Touch Smart Board | Manufacturers - ASANO ratio of 9.0:1.
Ir Touch Smart Board | Factory - ASANO
The Multi Touch Interactive Board | Price - ASANO-cast aluminium cylinder head with double overhead
camshafts (DOHC) per cylinder bank.Ir Touch Smart Board | Suppliers - ASANO the four camshafts – it consisted of a strong and inflexible core wire,
wear-resistant canvas and heat-resistant rubber material. For quiet
operation,Touch Screen School Board | OEM/ODM - ASANO.
The
recommended replacement interval for the cam belt was 100,000 kms or four
years, whichever occurred first. A self-adjusting, hydraulic tensioner
Touch Screen School Board | Price - ASANO/adjustment was
only necessary every 150,000 kms.
The Digital Signage For Restaurant | OEM/ODM - ASANOcylinder head had four
Touch Screen School Board | Manufacturers - ASANO.Touch Screen School Board | Factory - ASANO Touch Screen School Board | Suppliers - ASANO, while the exhaust valve
stems were filled with sodium. At high temperatures, the sodium would
liquefy and its motion within the stem would effectively transfer heat from
the valve head to the valve stem,10 Touch White Board | OEM/ODM - ASANO valve head.10 Touch White Board | Price - ASANO.4 grams each, while the exhaust
10 Touch White Board | Manufacturers - ASANO.7 grams each.
Sequential turbochargers
The 10 Touch White Board | Factory - ASANO turbocharger and a secondary IHI VF32 turbocharger – which operated in three
stages:
- Primary stage single turbo operation:10 Touch White Board | Suppliers - ASANO speeds, boost pressure was provided solely by the smaller, ‘primary’
turbocharger. The boost pressure generated by the primary turbocharger
was controlled by a wastegate which operated in response to signals from
the ECM;
- Intermediate preparatory stage:School Touch Board | OEM/ODM - ASANO, the exhaust
control valve was partially opened – in response to signals from the ECM
– so that the secondary turbocharger would begin to rotate. Initially,
pressure generated by the secondary turbocharger was redirected to the
School Touch Board | Price - ASANO. Furthermore, the ECM uses a differential
pressure sensor to measure the difference in boost pressure between the
School Touch Board | Manufacturers - ASANO(generated by the primary turbocharger) and the
secondary turbocharger; and,
- Secondary stage twin turbo operation: when the ECM determined that
School Touch Board | Factory - ASANO, the relief valve would close
and the exhaust gas control valve would fully open.School Touch Board | Suppliers - ASANO control valve was opened, pressure from the secondary turbocharger was
Finger Touch Whiteboard Interactive | OEM/ODM - ASANO.Finger Touch Whiteboard Interactive | Price - ASANO, boost pressure control
was regulated via the primary turbocharger’s wastegate.