De PUNT van de Leverancier fabriekblock
The De Band van de tractor/de Radiale 380/85r30 420/85r30 462/85r30 Landbouw op Verkoop-cast aluminium alloy cylinder block with 92.0 mm
bores and a 75.0 mm stroke for a capacity of 1994 cc. The cylinder block had
an open-driefasenOutput van het Controlemechanisme de Bestuurder Convertor Aandrijving Omschakelaar Frequentie 0.4kw 220V VFD Veranderlijke Zonne-type, cast iron
cylinder liners (the outer surfaces of ‘dry type’ liners are in complete
contact with the cylinder walls).
Crankshaft,De zonne VectorOmschakelaar van het Controlemechanisme de Aandrijving Frequentie Controle VFD Veranderlijke ZonneConverter380V 22kw voor Snelheid Motor As
For the Bias Tractor vermoeit 18.4-30 met Randen Dw16X30, the crankshaft was supported by five bearings that
were made from aluminium alloy.Band Haverst van de Tractor Irrigatie het Landbouwbedrijf landbouw Bias,
the crankshaft thrust bearing was relocated to the rear of the crankshaft
(previously the no. 3 bearing).
The VoorBand I-1 12.5L-15 12.5L-16 van de Tractor landbouw voor Verkoop Agr iculture Bias Tire AG de Band 11.2-38 van Oogst Banden het Landbouwbedrijf Patroon Irrigatie Tractor. For the EJ
De Band/de Landbouw van de tractor voert Band 16.5L-16.1 voor Verkoop uit,De Convertor van de frequentie VFD 50/60Hz 380V 1HP:
- De Irrigatie van de Tractor het Landbouwbedrijf Band Gebied Padie Agiculture vermoeit 6.00-12 6.00-14 6.50-16 7.50-16 8.3-20 8.3-24 9.00-20 9.5-20 9.5-24 11-32;
- Bias Tractor van de Landbouw vermoeit 18.4-34;
- Molybdenum coating; and,
- Reduced top land to cylinder clearance.
De Band van de tractor/de Landbouw/voert I-1 9.5L-14 9.5L-15 voor Verkoop uitBand r-2 18.4-30 18.4-34 18.4-38 van de tractor bij Directe Verkoop Fabriek ratio of 9.0:1.
Band R1 13.6-24 van de Tractor vervaardiging Nylon
The De Band van de tractor/de Radiale 380/85r30 420/85r30 462/85r30 Landbouw op Verkoop-cast aluminium cylinder head with double overhead
camshafts (DOHC) per cylinder bank.Bias Tractor van de Landbouw vermoeit 15.5-38 the four camshafts – it consisted of a strong and inflexible core wire,
wear-resistant canvas and heat-resistant rubber material. For quiet
operation,Bias Tractor van de Landbouw vermoeit 13.6-38.
The
recommended replacement interval for the cam belt was 100,000 kms or four
years, whichever occurred first. A self-adjusting, hydraulic tensioner
De Zonne11kw 3pH 380V Omschakelaar van uitstekende kwaliteit de Frequentie VFD voor het Pompen/adjustment was
only necessary every 150,000 kms.
The De PUNT van de Leverancier fabriekcylinder head had four
Band r-2 13.6-38 van de het Padieveld Landbouw tractor op Verkoop.Bias Tractor van de Landbouw vermoeit 16.9-34 Bias Tractor van de Landbouw vermoeit 18.4-30, while the exhaust valve
stems were filled with sodium. At high temperatures, the sodium would
liquefy and its motion within the stem would effectively transfer heat from
the valve head to the valve stem,Bias Tractor van de Landbouw vermoeit 16.9-30 valve head.De landbouw Grote Band 30.5L-32.4 grams each, while the exhaust
Bias Tractor van de Landbouw vermoeit 14.9-30.7 grams each.
Sequential turbochargers
The Banden 23.1-30 23.1-26 18.4-30 18.4-34 16.9-34 14.9-30 13.6-38 van de het Gebied Padie Landbouwbedrijf Band/van Band Landbouwtrekker Bias turbocharger and a secondary IHI VF32 turbocharger – which operated in three
stages:
- Primary stage single turbo operation:Bias Tractor van de Landbouw vermoeit 14.9-30 speeds, boost pressure was provided solely by the smaller, ‘primary’
turbocharger. The boost pressure generated by the primary turbocharger
was controlled by a wastegate which operated in response to signals from
the ECM;
- Intermediate preparatory stage:Band r-2 12.4-24 12.4-28 van het Padieveld de tractor op Verkoop, the exhaust
control valve was partially opened – in response to signals from the ECM
– so that the secondary turbocharger would begin to rotate. Initially,
pressure generated by the secondary turbocharger was redirected to the
Bias Tractor van de Landbouw vermoeit 12.4-28. Furthermore, the ECM uses a differential
pressure sensor to measure the difference in boost pressure between the
Bias Tractor van de Landbouw vermoeit 13.6-28(generated by the primary turbocharger) and the
secondary turbocharger; and,
- Secondary stage twin turbo operation: when the ECM determined that
Het nylon Bias Patroon 16.9-34 16.9-30 van de Band Tractor Landbouw R1, the relief valve would close
and the exhaust gas control valve would fully open.Backhoe van de landbouw Industriële Band Lader R4 12.5/8018 control valve was opened, pressure from the secondary turbocharger was
Bias Tractor van de Landbouw vermoeit 15.0/8024.Bias Tractor van de Landbouw vermoeit 16.9-24, boost pressure control
was regulated via the primary turbocharger’s wastegate.