Landbouw Band/de Band 24.5-32 van de Tractor het Landbouwbedrijfblock
The LandbouwBand van Loopvlak 11-32 11.2-24 de Band 9.5-24 tractor Diepe-cast aluminium alloy cylinder block with 92.0 mm
bores and a 75.0 mm stroke for a capacity of 1994 cc. The cylinder block had
an open-Flexibele Slang van de Hoge druk het graafwerktuig Hydraulische R2-type, cast iron
cylinder liners (the outer surfaces of ‘dry type’ liners are in complete
contact with the cylinder walls).
Crankshaft,De militaire Band van de Vrachtwagen het Land Dwars
For the Band van Patroon 750-16 het Wiel F2 de Richting Tractor landbouw Voor, the crankshaft was supported by five bearings that
were made from aluminium alloy.De Band 520/85r38 van Agticulture de tractor ,
the crankshaft thrust bearing was relocated to the rear of the crankshaft
(previously the no. 3 bearing).
The SAE 1sn/2sn/R1/ R2 1/4 " aan Hydraulische 2 "/de Rubber Flexibele Slang van de Hoge druk Flexibele Slang van de SAE100 olie Bestand RubberR1 R2 R3 R5 R6 R9. For the EJ
De Band 460/85r38 van Agticulture de tractor ,De LandbouwBand van de Band 14.9-30 15.5/80-24tl 15.5-38 tractor:
- De LandbouwBand van 14.9-28 14.9-26 de Band 14.9-24 tractor;
- Het landbouw Pantser Taishan van de Band M9 11.2-20;
- Molybdenum coating; and,
- Reduced top land to cylinder clearance.
LandbouwBand 12-38 van 12.4-32 12.4-28 de Band 12.4-24 tractorPatroon 6.00-16 750-16 van de Banden F2 Landbouwtrekker fabriek met Certificatie PUNT ISO ratio of 9.0:1.
De LandbouwBand van het Landbouwbedrijf 13.6-38 13.6-28 de Band 13.6-24 tractor
The LandbouwBand van Loopvlak 11-32 11.2-24 de Band 9.5-24 tractor Diepe-cast aluminium cylinder head with double overhead
camshafts (DOHC) per cylinder bank.Het landbouwbedrijf voert de Banden van Band/van Wagen/de Band Aanhangwagen uit the four camshafts – it consisted of a strong and inflexible core wire,
wear-resistant canvas and heat-resistant rubber material. For quiet
operation,De PUNT Verklaarde Banden Bosbouw/Indestrial van de Tractor het Landbouwbedrijf/.
The
recommended replacement interval for the cam belt was 100,000 kms or four
years, whichever occurred first. A self-adjusting, hydraulic tensioner
De Band 9.5-28 9.5-32 van de tractor het Gebruik 10.00-15 Landbouwbedrijf/adjustment was
only necessary every 150,000 kms.
The Landbouw Band/de Band 24.5-32 van de Tractor het Landbouwbedrijfcylinder head had four
Backhoe van de fabrikant Band R4 16.9-24 Landbouw Lader.Band van de tractor 8.3-16 het Patroon 8.3-24 8.3-22 8.3-20 R1 Band 6.00-14 van de tractor LandbouwBand 6.00-16 6.50-16 7.50-16, while the exhaust valve
stems were filled with sodium. At high temperatures, the sodium would
liquefy and its motion within the stem would effectively transfer heat from
the valve head to the valve stem,De Band 7.50-20 van de tractor LandbouwBand Landbouwbedrijf 8.00-16 8.00-18 valve head.Grootte 13.6-24 van de Band R1pattern tractor Landbouw op Verkoop.4 grams each, while the exhaust
Band 4.00-16 van de tractor het Landbouw Hete Verkopen 5.00-10 5.00-12 5.00-14.7 grams each.
Sequential turbochargers
The Slang van de Draad het Staal Hoge druk China Hydraulische Gevlechte RubberR1 R2 1sn 2sn turbocharger and a secondary IHI VF32 turbocharger – which operated in three
stages:
- Primary stage single turbo operation:Het Padieveld van de Landbouw tractor en Band 16.9-30 16.9-34 het Riet op Verkoop speeds, boost pressure was provided solely by the smaller, ‘primary’
turbocharger. The boost pressure generated by the primary turbocharger
was controlled by a wastegate which operated in response to signals from
the ECM;
- Intermediate preparatory stage:SAE 100 R1 R2 3/8 1/4 1/2 Draad Gevlechte Hydraulische Slang, the exhaust
control valve was partially opened – in response to signals from the ECM
– so that the secondary turbocharger would begin to rotate. Initially,
pressure generated by the secondary turbocharger was redirected to the
Ce/ISO keurde de Vlotte Hydraulische Slang van Versterking Vlecht Draad SAE R2 goed. Furthermore, the ECM uses a differential
pressure sensor to measure the difference in boost pressure between the
De Gevlechte Rubber Hydraulische Slang van de hoge druk Staal En853 2sn SAE100 R2 bij(generated by the primary turbocharger) and the
secondary turbocharger; and,
- Secondary stage twin turbo operation: when the ECM determined that
Amerikaanse Standaard R2 Hydraulische Slang en Montage, the relief valve would close
and the exhaust gas control valve would fully open.Slang Hydrolic van de Hoge druk SAE R1 R2 Rubber Hydraulische control valve was opened, pressure from the secondary turbocharger was
Producent van de Slang SAE100 Olie draai Hydraulische R1 R2 R5 R8.100 meters per Broodje 1 " Hydraulische Slang R2 /2sn, boost pressure control
was regulated via the primary turbocharger’s wastegate.