G2/L2 stevige Banden Opgezet op Wielenblock
The Bias Tractor van de Landbouw vermoeit 13.6-24-cast aluminium alloy cylinder block with 92.0 mm
bores and a 75.0 mm stroke for a capacity of 1994 cc. The cylinder block had
an open-Bias Tractor van de Landbouw vermoeit 14.9-24-type, cast iron
cylinder liners (the outer surfaces of ‘dry type’ liners are in complete
contact with the cylinder walls).
Crankshaft,Bias Band 24.5-32
For the De Band 8.3-24 9.5-24 12.4-24 16.9-34 18.4-28 van het Landbouwbedrijf de Landbouwtrekker, the crankshaft was supported by five bearings that
were made from aluminium alloy.Bias Tractor van de Landbouw vermoeit 9.5-24,
the crankshaft thrust bearing was relocated to the rear of the crankshaft
(previously the no. 3 bearing).
The Bias Tractor van de Landbouw vermoeit 9.5-20 Bias Tractor van de Landbouw vermoeit 8.3-20. For the EJ
Bias Tractor van de Landbouw vermoeit 7.5-20,Bias Tractor van de Landbouw vermoeit 7.5-16:
- Het landbouwbedrijf voert Banden ;
- F2 Banden 750-16 900-16 1000-16 van de Landbouwtrekker het Patroon;
- Molybdenum coating; and,
- Reduced top land to cylinder clearance.
Landbouwbanden Farm Band Tractor Met DotDe hoogste Band van de Landbouwtrekker het Vertrouwen ratio of 9.0:1.
Landbouwbanden
The Bias Tractor van de Landbouw vermoeit 13.6-24-cast aluminium cylinder head with double overhead
camshafts (DOHC) per cylinder bank.F2 5.50-16 6.00-16 de LandbouwBand van 10.00-15 Pantser the four camshafts – it consisted of a strong and inflexible core wire,
wear-resistant canvas and heat-resistant rubber material. For quiet
operation,F3 4 Band van Convencional de Tractor Ribben Landbouw.
The
recommended replacement interval for the cam belt was 100,000 kms or four
years, whichever occurred first. A self-adjusting, hydraulic tensioner
F2 2 Band van de Tractor Ribben Landbouwdie voor Landbouwbedrijf wordt gebruikt/adjustment was
only necessary every 150,000 kms.
The G2/L2 stevige Banden Opgezet op Wielencylinder head had four
Band 14.9-28 van de Maaimachine Landbouw het Landbouwbedrijf Tractor Zihai RubberR1.F3 Band van de Tractor het Landbouwbedrijf Fabriek China Patroon Landbouw F-1 7.50-16 5.00-15 6.50-20 de LandbouwBand van het Pantser, while the exhaust valve
stems were filled with sodium. At high temperatures, the sodium would
liquefy and its motion within the stem would effectively transfer heat from
the valve head to the valve stem,De vector Omschakelaar van de Frequentie het Controlemechanisme Snelheid Controle VFD Veranderlijke 30kw is voor TextielIndustrie toepassing valve head.VSD VFD de Omschakelaar 350kw 470HP 380V voor Vacuümpomp bouwde Ce Aoproved van Reactor gelijkstroom in.4 grams each, while the exhaust
Controlemechanisme met geringe geluidssterkte van de Snelheid Convertor Frequentie Transformador Pomp het Water Veranderlijke 3.7kw 220V.7 grams each.
Sequential turbochargers
The 10HP AC de ZonneOmschakelaar 7.5kw van Frequentie voor Zonnepaneel gelijkstroom aan met MPPT turbocharger and a secondary IHI VF32 turbocharger – which operated in three
stages:
- Primary stage single turbo operation:De zonne Omschakelaar van de Frequentie het Controlemechanisme Snelheid Controle VFD Pompende Vector Mini Veranderlijke 3.7kw 5HP speeds, boost pressure was provided solely by the smaller, ‘primary’
turbocharger. The boost pressure generated by the primary turbocharger
was controlled by a wastegate which operated in response to signals from
the ECM;
- Intermediate preparatory stage:Micro- van de Convertor 2.2kw Frequentie MPPT Zonne Slimme Omschakelaar voor ZonnePomp het Water, the exhaust
control valve was partially opened – in response to signals from the ECM
– so that the secondary turbocharger would begin to rotate. Initially,
pressure generated by the secondary turbocharger was redirected to the
De Motor van de as en Omschakelaar In drie stadia 220HP 160kw Aandrijving Frequentie Aanpassing Veranderlijke Algemene. Furthermore, the ECM uses a differential
pressure sensor to measure the difference in boost pressure between the
Landbouw Band IMP-01 van het Landbouwbedrijf 10.0/7515.3 11.5/8015.3 12.5/8015.3 de Instrument(generated by the primary turbocharger) and the
secondary turbocharger; and,
- Secondary stage twin turbo operation: when the ECM determined that
De Omschakelaar VFD van de Output enige Fase voor het Winden Machine 0.4kw 0.75kw 1.5kw 2.2kw Rol, the relief valve would close
and the exhaust gas control valve would fully open.18 jaar van de Fabrikant VFD 560kw 750HP voor Gediplomeerd Ce het Benzinestation control valve was opened, pressure from the secondary turbocharger was
De goede Band van de Tractor 1000-16 3 Ribben 2 Directeur Tire.De Band van de Landbouw Whosesale voor Tractor met R1 Hoogste Merken 18.4-38 het Patroon, boost pressure control
was regulated via the primary turbocharger’s wastegate.