Cylinder head and camshafts
The Android Kiosk | Suppliers - ASANO-driven double
overhead camshafts (DOHC) per cylinder bank. The Advertising Player Factory | OEM/ODM - ASANO Advertising Player Factory | Price - ASANO:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Advertising Player Factory | Manufacturers - ASANO incorporated on the front surface of the block and cylinder heads, while the
Advertising Player Factory | - ASANO with three bonds.
Dual AVCS
The Advertising Player Factory | Suppliers - ASANO's 'Television 42 Inch | OEM/ODM - ASANO'
(Dual AVCS)Led Advertising Board | OEM/ODM - ASANO.
Operation of the Dual AVCS may be summarised as follows:
- Led Advertising Board | Price - ASANO setting. To advance, the camshaft rotated in the same direction as the
Led Advertising Board | Manufacturers - ASANO(Led Advertising Board | Factory - ASANO).
Led Advertising Board | Suppliers - ASANO, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Indoor Advertising Digital Signage | OEM/ODM - ASANO rotation (Indoor Advertising Digital Signage | Price - ASANO).
When the exhaust camshaft was retarded, it allowed the expanding gases
Indoor Advertising Digital Signage | Manufacturers - ASANO for better fuel efficiency.
By
Indoor Advertising Digital Signage | Factory - ASANO, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Indoor Advertising Digital Signage | Suppliers - ASANO.Network Advertising Digital Signage | OEM/ODM - ASANO start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
Network Advertising Digital Signage | Price - ASANO, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Network Advertising Digital Signage | Manufacturers - ASANO, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Network Advertising Digital Signage | Factory - ASANO had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Network Advertising Digital Signage | Suppliers - ASANO Hanging Lcd Digital Signage | OEM/ODM - ASANO, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Hanging Lcd Digital Signage | Price - ASANO feedback.
The injection and firing order for the With Digital Tuner Dvb-t/t2 | Factory - ASANOwas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Hanging Lcd Digital Signage | Manufacturers - ASANO parallel-Hanging Lcd Digital Signage | Factory - ASANO. The parallel-Hanging Lcd Digital Signage | Suppliers - ASANO Wifi Network Digital Signage Player Lcd | OEM/ODM - ASANO cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Wifi Network Digital Signage Player Lcd | Price - ASANO combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
Wifi Network Digital Signage Player Lcd | Manufacturers - ASANO enabled safe operation on lower RON fuel. Furthermore,Wifi Network Digital Signage Player Lcd | Factory - ASANO Wifi Network Digital Signage Player Lcd | Suppliers - ASANO.
Exhaust
Compared to the EZ30R which had a ‘J turn’Lcd Digital Picture Frame | OEM/ODM - ASANO, the Network Advertising Digital Signage | Factory - ASANO had a ‘U turn’ exhaust to minimise vibration.Lcd Digital Picture Frame | Price - ASANO with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.