Cylinder head and camshafts
The Hd Camera | Factory - ASANO-driven double
overhead camshafts (DOHC) per cylinder bank. The Hd Camera | Suppliers - ASANO Moving Stand | OEM/ODM - ASANO:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Moving Stand | Price - ASANO incorporated on the front surface of the block and cylinder heads, while the
Moving Stand | Manufacturers - ASANO with three bonds.
Dual AVCS
The Moving Stand | Factory - ASANO's 'Miracast Dongle | Suppliers - ASANO'
(Dual AVCS)Moving Stand | Suppliers - ASANO.
Operation of the Dual AVCS may be summarised as follows:
- Infrared Touch/Capacitive Touch | OEM/ODM - ASANO setting. To advance, the camshaft rotated in the same direction as the
Infrared Touch/Capacitive Touch | Price - ASANO(Infrared Touch/Capacitive Touch | Manufacturers - ASANO).
Infrared Touch/Capacitive Touch | Factory - ASANO, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Infrared Touch/Capacitive Touch | Suppliers - ASANO rotation (Stand | OEM/ODM - ASANO).
When the exhaust camshaft was retarded, it allowed the expanding gases
Stand | Price - ASANO for better fuel efficiency.
By
Stand | Manufacturers - ASANO, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Stand | Factory - ASANO.Stand | Suppliers - ASANO start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
Wall Mount | OEM/ODM - ASANO, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Wall Mount | Price - ASANO, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Wall Mount | Manufacturers - ASANO had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Wall Mount | Factory - ASANO Wall Mount | Suppliers - ASANO, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
2k Screen | OEM/ODM - ASANO feedback.
The injection and firing order for the Wifi Android Advertising Display | Suppliers - ASANOwas
1-6-3-2-5-4.
Cooling
Compared to EZ30,2k Screen | Price - ASANO parallel-2k Screen | Manufacturers - ASANO. The parallel-2k Screen | Factory - ASANO 2k Screen | Suppliers - ASANO cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Electronic Signage | OEM/ODM - ASANO combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
Electronic Signage | Price - ASANO enabled safe operation on lower RON fuel. Furthermore,Electronic Signage | Manufacturers - ASANO Electronic Signage | Factory - ASANO.
Exhaust
Compared to the EZ30R which had a ‘J turn’Electronic Signage | Suppliers - ASANO, the Wall Mount | Manufacturers - ASANO had a ‘U turn’ exhaust to minimise vibration.Windows | OEM/ODM - ASANO with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.