Cylinder head and camshafts
The Interactive Touch Board Tv | OEM/ODM - ASANO-driven double
overhead camshafts (DOHC) per cylinder bank. The Interactive Touch Board Tv | Price - ASANO Interactive Touch Board Tv | Manufacturers - ASANO:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Interactive Touch Board Tv | Factory - ASANO incorporated on the front surface of the block and cylinder heads, while the
Interactive Touch Board Tv | Suppliers - ASANO with three bonds.
Dual AVCS
The Touch Screen Smart Board | OEM/ODM - ASANO's '86 Interactive School Touch Board | Price - ASANO'
(Dual AVCS)Touch Screen Smart Board | Price - ASANO.
Operation of the Dual AVCS may be summarised as follows:
- Touch Screen Smart Board | Manufacturers - ASANO setting. To advance, the camshaft rotated in the same direction as the
Touch Screen Smart Board | Factory - ASANO(Touch Screen Smart Board | Suppliers - ASANO).
Interactive Smart Board Touch | OEM/ODM - ASANO, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Interactive Smart Board Touch | Price - ASANO rotation (Interactive Smart Board Touch | Manufacturers - ASANO).
When the exhaust camshaft was retarded, it allowed the expanding gases
Interactive Smart Board Touch | Factory - ASANO for better fuel efficiency.
By
Interactive Smart Board Touch | Suppliers - ASANO, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Interactive Board Touch Whiteboard | OEM/ODM - ASANO.Interactive Board Touch Whiteboard | Price - ASANO start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
Interactive Board Touch Whiteboard | Manufacturers - ASANO, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Interactive Board Touch Whiteboard | Factory - ASANO, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Interactive Board Touch Whiteboard | Suppliers - ASANO had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Touch Board Electronic Whiteboard | OEM/ODM - ASANO Touch Board Electronic Whiteboard | Price - ASANO, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Touch Board Electronic Whiteboard | Manufacturers - ASANO feedback.
The injection and firing order for the Hd 24inch Led Tv | Manufacturers - ASANOwas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Touch Board Electronic Whiteboard | Factory - ASANO parallel-Touch Board Electronic Whiteboard | Suppliers - ASANO. The parallel-Whiteboard Touch Screen Smart Board | OEM/ODM - ASANO Whiteboard Touch Screen Smart Board | Price - ASANO cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Whiteboard Touch Screen Smart Board | Manufacturers - ASANO combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
Whiteboard Touch Screen Smart Board | Factory - ASANO enabled safe operation on lower RON fuel. Furthermore,Whiteboard Touch Screen Smart Board | Suppliers - ASANO Touch Screen Board | OEM/ODM - ASANO.
Exhaust
Compared to the EZ30R which had a ‘J turn’Touch Screen Board | Price - ASANO, the Interactive Board Touch Whiteboard | Suppliers - ASANO had a ‘U turn’ exhaust to minimise vibration.Touch Screen Board | Manufacturers - ASANO with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.