Cylinder head and camshafts
The Led Electronic Blackboard | OEM/ODM - ASANO-driven double
overhead camshafts (DOHC) per cylinder bank. The Led Electronic Blackboard | Price - ASANO Led Electronic Blackboard | Manufacturers - ASANO:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Led Electronic Blackboard | Factory - ASANO incorporated on the front surface of the block and cylinder heads, while the
Led Electronic Blackboard | Suppliers - ASANO with three bonds.
Dual AVCS
The Electronic Led Writing Blackboard | OEM/ODM - ASANO's 'Wireless Transmission Of Video | Price - ASANO'
(Dual AVCS)Electronic Led Writing Blackboard | Price - ASANO.
Operation of the Dual AVCS may be summarised as follows:
- Electronic Led Writing Blackboard | Manufacturers - ASANO setting. To advance, the camshaft rotated in the same direction as the
Electronic Led Writing Blackboard | Factory - ASANO(Electronic Led Writing Blackboard | Suppliers - ASANO).
Blackboard School Electronic | OEM/ODM - ASANO, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Blackboard School Electronic | Price - ASANO rotation (Blackboard School Electronic | Manufacturers - ASANO).
When the exhaust camshaft was retarded, it allowed the expanding gases
Blackboard School Electronic | Factory - ASANO for better fuel efficiency.
By
Blackboard School Electronic | Suppliers - ASANO, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Electronic Classroom Blackboard | OEM/ODM - ASANO.Electronic Classroom Blackboard | Price - ASANO start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
Electronic Classroom Blackboard | Manufacturers - ASANO, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Electronic Classroom Blackboard | Factory - ASANO, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Electronic Classroom Blackboard | Suppliers - ASANO had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Electronic Blackboard For Classroom | OEM/ODM - ASANO Electronic Blackboard For Classroom | Price - ASANO, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Electronic Blackboard For Classroom | Manufacturers - ASANO feedback.
The injection and firing order for the Standalone Digital Signage Display | Manufacturers - ASANOwas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Electronic Blackboard For Classroom | Factory - ASANO parallel-Electronic Blackboard For Classroom | Suppliers - ASANO. The parallel-Lcd Electronic Blackboard | OEM/ODM - ASANO Lcd Electronic Blackboard | Price - ASANO cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Lcd Electronic Blackboard | Manufacturers - ASANO combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
Lcd Electronic Blackboard | Factory - ASANO enabled safe operation on lower RON fuel. Furthermore,Lcd Electronic Blackboard | Suppliers - ASANO Classroom Electronic Blackboard | OEM/ODM - ASANO.
Exhaust
Compared to the EZ30R which had a ‘J turn’Classroom Electronic Blackboard | Price - ASANO, the Electronic Classroom Blackboard | Suppliers - ASANO had a ‘U turn’ exhaust to minimise vibration.Classroom Electronic Blackboard | Manufacturers - ASANO with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.