Block and crankcase
Like its EJ20 predecessor,OEM China Low Pressure Die Casting Wholesaler - YakonMoldOEM China Low Pressure Die Casting Exporter - YakonMold aluminium alloy block with 92.0 mm bores – with cast iron dry-type cylinder
liners – and a 75.0 mm stroke for a capacity of 1994 cc. The cylinder block
for the OEM China Low Pressure Die Casting Factory - YakonMold-deck design whereby the cylinder
walls were supported at the three and nine o’clock positions.
The
crankcase for the OEM China Low Pressure Die Casting Manufacturers - YakonMold flywheel housing was cast with the crankcase for increased rigidity. For the
Supply China Die Casting Aluminum Housing Factory - YakonMold, the crankshaft thrust bearing was relocated to the
OEM China Low Pressure Die Casting Suppliers - YakonMold frequencies to the transmission and driveline.
Supply China Low Pressure Die Casting Wholesaler - YakonMold
Supply China Low Pressure Die Casting Exporter - YakonMoldSupply China Low Pressure Die Casting Manufacturers - YakonMold from cast aluminium,Supply China Low Pressure Die Casting Suppliers - YakonMold predecessor. To reduce friction,Wholesale China Low Pressure Die Casting OEM/ODM Quotes - YakonMoldSupply China Aluminum Die Casting Suppliers - YakonMold Wholesale China Low Pressure Die Casting Exporter - YakonMold. Other features of
Wholesale China Low Pressure Die Casting Manufacturers - YakonMold-OEM China Stamping Die Wholesaler - YakonMold, flat top combustion surfaces
OEM China Stamping Die Exporter - YakonMold.
OEM China Stamping Die Factory - YakonMold
OEM China Stamping Die Manufacturers - YakonMoldOEM China Stamping Die Suppliers - YakonMold Supply China Stamping Die OEM/ODM Quotes - YakonMold.Supply China Stamping Die Wholesaler - YakonMold temperature, the air inlet duct received air from outside the under bonnet
area. Furthermore, two resonators were incorporated in the air duct to
‘smooth’ the air flow and a large still air box - mounted on the throttle
chamber -Supply China Stamping Die Manufacturers - YakonMold.
Cylinder head
The Supply China Stamping Die Suppliers - YakonMold cross-flow cooling.Wholesale China Stamping Die OEM/ODM Quotes - YakonMold,Wholesale China Stamping Die Wholesaler - YakonMold Wholesale China Stamping Die Exporter - YakonMold‘Supply China Aluminum Die Casting Exporter - YakonMold’ motion for air as it entered the
cylinder for better mixing of the air and fuel for more uniform flame travel
and faster combustion.Wholesale China Stamping Die Manufacturers - YakonMold,Wholesale China Stamping Die Suppliers - YakonMold for maximum gas pressure (downward force)OEM China Stamping OEM/ODM Quotes - YakonMold-15
degrees ATDC (after top dead centre) when the maximum turning moment on the
crankshaft occurred, thereby increasing power output.
Camshaft and valves
The OEM China Stamping Wholesaler - YakonMold-type single overhead camshaft
(SOHC) per cylinder bank. Due to the cylinder head offset, the left camshaft
was longer than the right camshaft to align the cam belt sprockets. Both
camshafts were driven by a single belt which had round profile teeth for
quiet operation and was constructed of wear-resistant double canvas and heat
resistant rubber materials with a wire core. Furthermore, the timing belt
had an automatic tensioner which allowed for thermal expansion and
contraction. The recommended replacement interval for the cam belt was
100,000 kilometres or four years, whichever occurred first.
The
OEM China Stamping Exporter - YakonMold roller rocker arms. Valve clearance checking/adjustment was only necessary
every 150,000 kms.
Injection and ignition
The OEM China Stamping Factory - YakonMold-point sequential fuel injection and
centrally located spark plugs. The OEM China Stamping Suppliers - YakonMold coils (one for each pair of cylinders, i.e. 1-2 and 3-4) which fired the
spark plugs directly twice per cycle.Supply China Stamping Exporter - YakonMold ‘fuzzy logic’ that enabled the maximum ignition advanced angle to be used
without detonation since the programme continually adapted to changes in
environmental conditions and fuel quality.
The Supply China Quick Prototyping Wholesaler - YakonMold
Supply China Stamping Factory - YakonMold.1:1, compared to 9.7:1 for its
Wholesale China Iron Fencing OEM/ODM Quotes - Mujiangpredecessor.Wholesale China Stamping Die Manufacturers - YakonMold, the better air/fuel mixing provided by the
Supply China Stamping Manufacturers - YakonMoldSupply China Stamping Suppliers - YakonMold to detonation or pinging, enabling a higher compression ratio.
For
the Supply China Die Casting Aluminum Housing Factory - YakonMold, the injection and firing order was 1-3-2-4.
Wholesale China Stamping OEM/ODM Quotes - YakonMold/Wholesale China Stamping Wholesaler - YakonMold: EJ202 changes
For the
Wholesale China Aluminum Sheet Metal Prototype Wholesaler - YakonMoldwhich was introduced in 2003, a number of
Wholesale China Stamping Exporter - YakonMold:
- A lighter cylinder block and head;
- Thinner and lighter cylinder liners;
- A sintered crankshaft journal;
- A re-Wholesale China Stamping Factory - YakonMold; and,
- A new 4-2-Wholesale China Stamping Manufacturers - YakonMold.
