Block and crankcase
Like its EJ20 predecessor,Wholesale China Die Casting Manufacturers - YakonMoldOEM China Rapid Prototypes OEM/ODM Quotes - YakonMold aluminium alloy block with 92.0 mm bores – with cast iron dry-type cylinder
liners – and a 75.0 mm stroke for a capacity of 1994 cc. The cylinder block
for the OEM China Rapid Prototypes Wholesaler - YakonMold-deck design whereby the cylinder
walls were supported at the three and nine o’clock positions.
The
crankcase for the OEM China Rapid Prototypes Factory - YakonMold flywheel housing was cast with the crankcase for increased rigidity. For the
Supply China Zinc Die Casting Manufacturers - YakonMold, the crankshaft thrust bearing was relocated to the
OEM China Rapid Prototypes Manufacturers - YakonMold frequencies to the transmission and driveline.
OEM China Rapid Prototypes Suppliers - YakonMold
Supply China Rapid Prototypes Wholesaler - YakonMoldSupply China Rapid Prototypes Exporter - YakonMold from cast aluminium,Supply China Rapid Prototypes Factory - YakonMold predecessor. To reduce friction,Supply China Rapid Prototypes Manufacturers - YakonMoldSupply China Die Casting Manufacturers - YakonMold Supply China Rapid Prototypes Suppliers - YakonMold. Other features of
Wholesale China Rapid Prototypes OEM/ODM Quotes - YakonMold-Wholesale China Rapid Prototypes Factory - YakonMold, flat top combustion surfaces
Wholesale China Rapid Prototypes Manufacturers - YakonMold.
Wholesale China Rapid Prototypes Suppliers - YakonMold
OEM China Die Casting Prototype OEM/ODM Quotes - YakonMoldOEM China Die Casting Prototype Wholesaler - YakonMold OEM China Die Casting Prototype Exporter - YakonMold.OEM China Die Casting Prototype Factory - YakonMold temperature, the air inlet duct received air from outside the under bonnet
area. Furthermore, two resonators were incorporated in the air duct to
‘smooth’ the air flow and a large still air box - mounted on the throttle
chamber -OEM China Die Casting Prototype Manufacturers - YakonMold.
Cylinder head
The Supply China Die Casting Prototype Exporter - YakonMold cross-flow cooling.Supply China Die Casting Prototype Manufacturers - YakonMold,Wholesale China Die Casting Prototype Wholesaler - YakonMold Wholesale China Die Casting Prototype Exporter - YakonMold‘Supply China Die Casting OEM/ODM Quotes - YakonMold’ motion for air as it entered the
cylinder for better mixing of the air and fuel for more uniform flame travel
and faster combustion.Wholesale China Die Casting Prototype Manufacturers - YakonMold,Wholesale China Die Casting Prototype Suppliers - YakonMold for maximum gas pressure (downward force)OEM China Led Sink Prototype Wholesaler - YakonMold-15
degrees ATDC (after top dead centre) when the maximum turning moment on the
crankshaft occurred, thereby increasing power output.
Camshaft and valves
The OEM China Led Sink Prototype Manufacturers - YakonMold-type single overhead camshaft
(SOHC) per cylinder bank. Due to the cylinder head offset, the left camshaft
was longer than the right camshaft to align the cam belt sprockets. Both
camshafts were driven by a single belt which had round profile teeth for
quiet operation and was constructed of wear-resistant double canvas and heat
resistant rubber materials with a wire core. Furthermore, the timing belt
had an automatic tensioner which allowed for thermal expansion and
contraction. The recommended replacement interval for the cam belt was
100,000 kilometres or four years, whichever occurred first.
The
OEM China Led Sink Prototype Suppliers - YakonMold roller rocker arms. Valve clearance checking/adjustment was only necessary
every 150,000 kms.
Injection and ignition
The Supply China Led Sink Prototype Wholesaler - YakonMold-point sequential fuel injection and
centrally located spark plugs. The Supply China Led Sink Prototype Exporter - YakonMold coils (one for each pair of cylinders, i.e. 1-2 and 3-4) which fired the
spark plugs directly twice per cycle.Supply China Led Sink Prototype Manufacturers - YakonMold ‘fuzzy logic’ that enabled the maximum ignition advanced angle to be used
without detonation since the programme continually adapted to changes in
environmental conditions and fuel quality.
The Supply China Customized Shoes Suppliers - Omeal
Wholesale China Led Sink Prototype OEM/ODM Quotes - YakonMold.1:1, compared to 9.7:1 for its
Wholesale China Feed Packing Bag Wholesaler - Hebei Packagingpredecessor.Wholesale China Die Casting Prototype Manufacturers - YakonMold, the better air/fuel mixing provided by the
Wholesale China Led Sink Prototype Exporter - YakonMoldWholesale China Led Sink Prototype Manufacturers - YakonMold to detonation or pinging, enabling a higher compression ratio.
For
the Supply China Zinc Die Casting Manufacturers - YakonMold, the injection and firing order was 1-3-2-4.
Wholesale China Led Sink Prototype Suppliers - YakonMold/OEM China 6061 7075 Aluminum Rapid Prototype OEM/ODM Quotes - YakonMold: EJ202 changes
For the
OEM China Sports Shoes OEM/ODM Quotes - Omealwhich was introduced in 2003, a number of
OEM China 6061 7075 Aluminum Rapid Prototype Wholesaler - YakonMold:
- A lighter cylinder block and head;
- Thinner and lighter cylinder liners;
- A sintered crankshaft journal;
- A re-OEM China 6061 7075 Aluminum Rapid Prototype Factory - YakonMold; and,
- A new 4-2-OEM China 6061 7075 Aluminum Rapid Prototype Manufacturers - YakonMold.
