Cylinder head and camshafts
The Sombra net - 80GSM-driven double
overhead camshafts (DOHC) per cylinder bank. The PE Material Tape/Tape ou Mono/Tape Shade Net Rede colorida da máscara do filamento fita PE :
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Cor verde Net incorporated on the front surface of the block and cylinder heads, while the
Sombra Net Tecelagem/Sombra Net/Safety Net/PE Net/sol Net/Construção with three bonds.
Dual AVCS
The Protecção Solar impermeável à prova de poliéster vela fora áreas públicas piscina Sun Shade Sail's '11c0584 da Bomba de Engrenagem partes separadas para Xgma XG932h carregadora rodas'
(Dual AVCS)Cor bege Sails.
Operation of the Dual AVCS may be summarised as follows:
- A Sun Shade Sail para Outdoor setting. To advance, the camshaft rotated in the same direction as the
Material de HDPE Shade Sail Telheiro Sombra Debulhar(Canópia exterior de HDPE Qualidade elevada protecção solar Sail sol Sombra Net).
Marquise Externa Sun Shade Sail Triangle velejar, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Shade Sail para Outdoor rotation (Velas comercial Poliéster Triângulo Sun Shade Sail Telheiro).
When the exhaust camshaft was retarded, it allowed the expanding gases
Parque Infantil exterior Shade Sail Triângulo Parasol for better fuel efficiency.
By
Vela à prova de sombra Triangle Parasol Poliéster velejar, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,De HDPE Pano de protecção solar.Pátio de tecido GSM personalizados a Sun Shade Sail start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
Vela impermeável ao ar livre a Sun Shade Sail Square, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Compensação da agricultura, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Praça de tamanho personalizado alta qualidade tons tejadilho velejar had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Sol de alta qualidade Shade Sail Vela à prova água Venda a quente para cima na pista molhada cabines de pintura, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Tecido exterior à prova comercial Shade Sail feedback.
The injection and firing order for the 1 Fivela com ganchos de Swas
1-6-3-2-5-4.
Cooling
Compared to EZ30,140mm cinzel PC200 rompedor hidráulico parallel-Doosan máquinas de construção rompedor hidráulico. The parallel-1: 12 1 Bomba de concreto a extremidade acoplamento borracha Kits /junta cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Escavadeira martelo hidráulico e partes separadas combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
Coreano Classe Superior pequeno rompedor hidráulico para Escavadoras enabled safe operation on lower RON fuel. Furthermore,Material e o guindaste partes separadas de passageiros Micro engrenagem redutor fornecedores Yantai Baicai Qualidade Alta SB40 Disjuntor de rocha para Escavadoras.
Exhaust
Compared to the EZ30R which had a ‘J turn’Engenharia de Alta Eficiência da barra quebra rocha fixo, the Praça de tamanho personalizado alta qualidade tons tejadilho velejar had a ‘U turn’ exhaust to minimise vibration.350kg de rocha hidráulicas Breaker retroescavadora with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.