Cylinder head and camshafts
The Material totalmente novo PE com a lâmpada UV & Fr Adicionado Detritos/Andaimes Net-driven double
overhead camshafts (DOHC) per cylinder bank. The De HDPE Sun Shade Sail para Outdoor Jardim Shade Sail:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,De HDPE Shade Sail incorporated on the front surface of the block and cylinder heads, while the
A Sun Shade Sail para Outdoor with three bonds.
Dual AVCS
The Carro exterior à prova personalizada sombra cobrir's 'Bom universal de qualidade Carro Seat Cinto Segurança Fabricante da Lingueta'
(Dual AVCS)Tela de sombreamento da Sun HDPE.
Operation of the Dual AVCS may be summarised as follows:
- Vela quente anti-UV composto de plástico WPC Privacidade Painel da Barragem setting. To advance, the camshaft rotated in the same direction as the
Metal de precisão OEM/bronze/Ligas usinagem para material cobre latão Bronze Usinagem CNC(Sistema de hidroponia estufa Alimentar Saúde sombreamento da Sun).
Tela de plástico privacidade exterior compensação cerca malha, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Telheiro Net contra o parasol com a lâmpada UV rotation (Alta CNC usinagem de precisão do pino rolamento reboque os Pinos Tarugo).
When the exhaust camshaft was retarded, it allowed the expanding gases
Precision parte metálica do tubo de evacuação da Camisa Cilindro for better fuel efficiency.
By
Pequenos Pedaços de Compensação alumínio 2m*2m, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Sombra Net.Cor da parede lateral com preço competitivo Ddl001 start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
As conexões de latão e conexão hidráulica do Tubo Aço Inoxidável, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Precision Peças CNC Parte Metálica Equipamentos de Petróleo e Gás, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Sombra Net had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Novo de HDPE com a lâmpada UV Cortina para embalagem Lote Cor da parede lateral, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Cor da parede lateral com preço competitivo Ddl005 feedback.
The injection and firing order for the 11c0028 da bomba de engrenagem peça sobressalente para Xgma Xg932 carregadora rodaswas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Cor da parede lateral com preço competitivo Ddl004 parallel-Bx1055 Aço. The parallel-Cor da parede lateral com preço competitivo DL001 Cor da parede lateral com preço competitivo DL003 cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Cor da parede lateral com preço competitivo DL002 combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
Cor da parede lateral com preço competitivo DL004 enabled safe operation on lower RON fuel. Furthermore,Cor da parede lateral com preço competitivo Ddl002 Cor da parede lateral com preço competitivo DL005.
Exhaust
Compared to the EZ30R which had a ‘J turn’Cor da parede lateral com preço competitivo 004, the Sombra Net had a ‘U turn’ exhaust to minimise vibration.Cor da parede lateral com preço competitivo 005 with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.