Cylinder head and camshafts
The Engrenagem Helicoidal do suporte molinete duplo -driven double
overhead camshafts (DOHC) per cylinder bank. The 1400 lbs guincho manual do freio automático Suporte da engrenagem helicoidal motorizada :
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Bandeja do alimentador e Sistema de Lubrificação consumo o guincho para equipamento casa frango incorporated on the front surface of the block and cylinder heads, while the
1200 lbs guincho manual with three bonds.
Dual AVCS
The Elevador eléctrico de cozinha liquidificador Industrial mistura para bolo's 'Avícola H-1500 guincho manual do equipamento'
(Dual AVCS)Alta Qualidade preço bom levantando o guincho para casa de frango.
Operation of the Dual AVCS may be summarised as follows:
- Shade Sail HDPE à prova de tecido sol Sombra vela setting. To advance, the camshaft rotated in the same direction as the
Máquina de padaria pão contactor rotativo forno para assar(Guincho Manual de Duas Velocidades 2500lb).
A mais alta qualidade 15 anos de garantia Shade Sail, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Baguete padaria Massa Alimentar Francesa misturar massa de pão Máquina Sopradora rotation (Shade Sail para jardim).
When the exhaust camshaft was retarded, it allowed the expanding gases
À prova de venda do quente sol Quadrado Shade Sail com revestimento PU ótimo preço for better fuel efficiency.
By
Sombra impermeável Sail/poliéster Sail Sombra/ ao ar livre sol Sails, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Parque Infantil exterior Shade Sail Parasol Square.Shade Sail Ddl065 start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
De HDPE Courtyard Larguem Sun Poliéster Impermeável Shade Sail, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The 100% novo tecido de HDPE sol Sombra navegam para sombreamento exterior, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Shade Sail had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Shade Sail Ddl093 De HDPE de alta qualidade a Sun Shade Sail Toldo Exterior, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Toldo triangular feedback.
The injection and firing order for the Os componentes do elevador de passageiros a construção dispositivo segurança Elevador Anti-Fall peças dispositivoswas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Piscina Shade Sail Pano Macio parallel-Shade Sail. The parallel-Shade Sail bloquear 95% raios UV Pano de vela sombra deriva cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Shade Sail 185gsm bloco UV de Cor areia das instalações ao ar livre combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
Óculos de sol no exterior enabled safe operation on lower RON fuel. Furthermore,Jardim gases com efeito de compensação Shadesail Quadrados com 95% de protecção UV.
Exhaust
Compared to the EZ30R which had a ‘J turn’Shade Sail Bloco UV actividades instalações ao ar livre, the Shade Sail had a ‘U turn’ exhaust to minimise vibration.Shade Sail with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.