Cylinder head and camshafts
The Venda a quente corda sintéticos CE Guincho eléctrico-driven double
overhead camshafts (DOHC) per cylinder bank. The Boa qualidade de 450um guincho relé 4X4 Guincho s Elétricos de boa qualidade:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Venda por grosso de Guincho eléctrico automático incorporated on the front surface of the block and cylinder heads, while the
China Fabricante 4X4 Corda sintética Guincho Eléctrico 9500lb with three bonds.
Dual AVCS
The 2014 Novo Modelo Corda sintética Guincho eléctrico's 'ATV Electric Guincho com 2000lb puxando a capacidade '
(Dual AVCS)Marcação com Rolete do Cabo-Guia Guincho eléctrico.
Operation of the Dual AVCS may be summarised as follows:
- China Fabricante 4X4 marcação guincho s setting. To advance, the camshaft rotated in the same direction as the
Venda por grosso Offroad Guincho eléctrico(China Fabricante 4X4 4WD Guincho eléctrico).
Untiy4wd guincho s elétricos, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Unidade 4WD guincho s elétricos rotation (9500lbs Guincho eléctrico para equipamento de 4X4).
When the exhaust camshaft was retarded, it allowed the expanding gases
4X4 12V Guincho eléctrico for better fuel efficiency.
By
Serviço de OEM livre 4X4 guincho s elétricos, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Promoção de venda Guincho s 4X4.Venda por grosso de guincho usado para venda start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
Guincho eléctrico 8000lb, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Design populares marcação 12V Guincho eléctrico, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the 2021 Hotselling 4X4 Acessório em trilhas marcação Guincho Eléctrico had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the 2021 Fabricante bastante Stock Hotsale Auto Guincho eléctrico 2021 Canton Fair Nova 4X4 Aprovado pela CE guincho s elétricos, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Bom Mercado marcação Winch 4X4 feedback.
The injection and firing order for the 50mm 5000kg amarrar o Ratchet a fustigar com anéis de Deltawas
1-6-3-2-5-4.
Cooling
Compared to EZ30,2021 Unity4wd corda sintética da marca Hotsale Guincho eléctrico parallel-O Unity4wd corda sintética da marca ATV Guincho Eléctrico do. The parallel-Qualidade superior marcação Mini 12v Guincho Eléctrico Famosa marca 4X4 Corda sintética Guincho eléctrico cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Fabricante profissional Guincho acessórios 4X4 combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
4X4 grande fabricante de promoção vendas Guincho Hotsale enabled safe operation on lower RON fuel. Furthermore,2021 na venda por grosso Unity4wd usadas Guincho Eléctrico 4X4 Guincho s elétricos com corda sintética do Cabo-Guia Rolete.
Exhaust
Compared to the EZ30R which had a ‘J turn’Corda sintética Guincho Eléctricos com Comando Sem Fios, the 2021 Hotselling 4X4 Acessório em trilhas marcação Guincho Eléctrico had a ‘U turn’ exhaust to minimise vibration.12000lb Electric Guincho s de recuperação automática with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.