Cylinder head and camshafts
The SL-6001 Pressão Alta PU Injecton Bomba com manômetro Pressure-Adjustable-driven double
overhead camshafts (DOHC) per cylinder bank. The Pressure-Adjustable SL-6001 resina Epoxy Máquina da bomba de injeção a espuma SL-6001 Projeto à Prova de resina epóxi Pressure-Adjustable PU máquina da Bomba Injeção:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Projecto impermeável SL-6001 Pressure-Adjustable da bomba de injeção poliuretano incorporated on the front surface of the block and cylinder heads, while the
Válvula de admissão da válvula 8-97102123-0 4LE2 with three bonds.
Dual AVCS
The 8980904301 898090-4301 8-98090430-1 4le2 da Polia do Ventilador's 'Bloco do coletor de UHMWPE PE deslizando o suporte tubo'
(Dual AVCS)4LE1 4le2 Válvula de admissão.
Operation of the Dual AVCS may be summarised as follows:
- 4le2 Cx75 8-98049033-0 da Correia do Ventilador setting. To advance, the camshaft rotated in the same direction as the
Ajustável de alta pressão injeção poliuretano Bomba com 110V Metabo furar(4le2 Cx75 refrigerador de EGR Asm 8-98030525-1).
Ajustável em máquinas de construção e engenharia alta pressão da bomba argamassa poliuretano, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Egr válvula feita no Japão 8-98030597-1 4LE2 rotation (Sk75-8 4le2 bico de injector gasóleo 8980928210 898092-8210).
When the exhaust camshaft was retarded, it allowed the expanding gases
Vedação de Óleo do Virabrequim 8-97049145 Dianteiro-0 para 4JG1 4JG2 4LE1 4le2 for better fuel efficiency.
By
4LB1 4LE1 4LE2 3LB1 3LD1 5-09625094 Traseiro da Vedação de Óleo do Virabrequim-0, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,4JJ1 Escavadoras Sh120 SH100 Sensor de Velocidade da Revolução 1815105130 6RB1 Sh450-3.Rastreado Chassis com 200kg de carga ostentando para personalização do Robô start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
6-32mm 3Kw Vergalhão Barra de qualidade superior corte preço do Cortador, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The 8-98089084-0 4le1/4le2 Kit de metal apoios cambota ZX55 As peças do motor da escavadeira, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Peças da Bomba de Combustível terraplenagem para 4le2 ZX55 8-98030569-0 had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the 4le2 8980638280 do virabrequim para miniescavadora ZX85usblc-3 Anel do Pistão original definido para 4le2 Cx75 ZX55 8-98095215-0 8-97141208-0, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
3KW 40mm Barra de aço corte da barra para o site Cnstruction feedback.
The injection and firing order for the 9500lb De Turck Guincho Automáticowas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Motor de partida original do Japão 24 V para 4le2 8-98072315 8-98072315-0-1 parallel-Cortador de barra aço 50 mm para venda Vergalhão Preço do. The parallel-rasto de borracha 350x52.5x104 para HDD Zt-18 perfuração direcional 4LE2t Pistão do Motor 8-98068158-1 cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
4JJ1 partes separadas do Motor Traseiro Virabrequim da Vedação de Óleo 8-97071561-1 combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
Verdadeiro novas peças de motor diesel 4JJ1 Bomba Água 8-98047688-3 enabled safe operation on lower RON fuel. Furthermore,42mm Barra de aço carbono máquina corte Vergalhão Inoxidável Cutter 8-98158110-0 4JJ1 partes separadas do Motor da Vedação de Óleo Dianteira Virabrequim.
Exhaust
Compared to the EZ30R which had a ‘J turn’3KW Motor cobre Steell máquina de corte da barra do cortador Vergalhão confiável, the Peças da Bomba de Combustível terraplenagem para 4le2 ZX55 8-98030569-0 had a ‘U turn’ exhaust to minimise vibration.Motor da Unidade de Controle ECU 4HK1 4JJ1 6HK1t 8-98080666-0 8-98080665-0 8-98075076-0 with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.