Cylinder head and camshafts
The Cabo do Guincho -driven double
overhead camshafts (DOHC) per cylinder bank. The Bx1103 Bar do guincho cromada Padrão As peças de máquinas construção Escavadeira engrenagem motor do trator buldozer:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Bx1091 TUV/GS Aprovado Máquina Tira do Guincho incorporated on the front surface of the block and cylinder heads, while the
Ebhw111 Guincho de mão aço with three bonds.
Dual AVCS
The Z08 Zinc-Alloy 32925-00Série da Junta Esférica's 'Shacman Shaaxi partes separadas do veículo'
(Dual AVCS)Escova universal Chicote Elétrico Duplo do Cortador Backpacker Factory vender.
Operation of the Dual AVCS may be summarised as follows:
- Semi-Trailer Trucktrailer Autopeças do Conjunto da Mola de Lâminas setting. To advance, the camshaft rotated in the same direction as the
As peças de plástico industriais(Cabo do Guincho ).
Bx3112 Guincho , it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,As peças de usinagem rotation (Bx3113 lado sobressalente).
When the exhaust camshaft was retarded, it allowed the expanding gases
De HDPE Material à prova de água para o Parque tecido sombra for better fuel efficiency.
By
Escova de alta qualidade do Chicote corte único tipo aparador grama, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,De HDPE pátio exterior a Sun Shade Sail toldos.Os componentes de precisão da máquina Inc Aerospace Peças usinadas start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
Peças de rodado Empresa China CNC, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Piscina Pergola de HDPE sol Sombra Fabric para Tubulações e Telheiro, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the As conexões de latão usinagem acabados personalizada had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Transportadora de carga do levante alumínio para 500 lb. Capacidade em prata Ásia barata Grupo Alumínio Bandeja de carga aérea em branco, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Rack de teto superior carga aérea 500 libras Capacidade Carga feedback.
The injection and firing order for the Óleo azul o anel de vedação do cilindro hidráulicowas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Alumínio ultra-leve de alumínio construção Carga do Levante Carrie Ásia Grupo parallel-Alta Resistência 11mm sintética trançada UHMWPE corda de tracção do cabo guincho. The parallel-Alta Resistência 10 4X4 VEÍCULO do Cabo-Guia Guincho com material de alumínio cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Cinta de suporte carga com montagem ancoragem da corrente combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
4 " tira do Guincho com gancho plana enabled safe operation on lower RON fuel. Furthermore,Para 8000-13500 Cabo-guia alumínio CNC Lb Sobressalente Autopeças com carro.
Exhaust
Compared to the EZ30R which had a ‘J turn’Sistema de protecção solar com efeito estufa hortícolas, the As conexões de latão usinagem acabados personalizada had a ‘U turn’ exhaust to minimise vibration.Varanda com lâmpada UV 10anos de garantia with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.