Cylinder head and camshafts
The Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 180 x 90-driven double
overhead camshafts (DOHC) per cylinder bank. The Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 190 x 90 Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 180 x 80:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 200 x 90 incorporated on the front surface of the block and cylinder heads, while the
Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 140 x 70 with three bonds.
Dual AVCS
The Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 200 x 90's 'Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 140 x 70'
(Dual AVCS)Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 200 x 90.
Operation of the Dual AVCS may be summarised as follows:
- Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 180 x 90 setting. To advance, the camshaft rotated in the same direction as the
Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 180 x 90(TYRAlliance ryggsäck).
Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 180 x 90, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 180 x 80 rotation (ergobagSportväska – med våtfack).
When the exhaust camshaft was retarded, it allowed the expanding gases
Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 190 x 90 for better fuel efficiency.
By
Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 140 x 70, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 180 x 90.Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 160 x 80 start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 180 x 80, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 180 x 80, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 140 x 70 had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Children's Beds Home - Enkelsäng Oscar för barn småbarn junior enkelsäng 160 x 80 Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 140 x 70, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 190 x 90 feedback.
The injection and firing order for the ReellPant Reflex Evo artikelnr. 1126-001 – 02-115was
1-6-3-2-5-4.
Cooling
Compared to EZ30,Children's Beds Home - Enkelsäng Lilja för barn Barn Småbarn Junior 160 x 80 parallel-Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 180 x 80. The parallel-Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 190 x 90 Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 200 x 90 cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 160 x 80 combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
Children's Beds Home - Enkelsäng Lilja för barn Barn Småbarn Junior 180 x 80 enabled safe operation on lower RON fuel. Furthermore,Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 160 x 80 Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 140 x 70.
Exhaust
Compared to the EZ30R which had a ‘J turn’Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 190 x 90, the Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 140 x 70 had a ‘U turn’ exhaust to minimise vibration.Children's Beds Home - Enkelsäng Lilja för barn Småbarn Junior 180 x 90 with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.