Cylinder head and camshafts
The Barres de renfort la cage machines soudage 1500mm diamètre des barres machine-driven double
overhead camshafts (DOHC) per cylinder bank. The Positionneur de soudage automatique Datang Welding Hb50 5t L'essence Non-Pressure Gasoline-Oxygen de soudage et Machine découpe chalumeau:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Coupe droite conique haut noir nouveau design de mode femmes Jeans Denim bleu incorporated on the front surface of the block and cylinder heads, while the
Usine Cage métallique d'alimentation en ligne de production la cage d'armature soudeur Seam pour une haute qualité with three bonds.
Dual AVCS
The Plate-forme flexible en 3D de la soudure forme octogonale Table du positionneur soudage's 'LED de plein air Pixel P10 affichage écran couleur'
(Dual AVCS)Le bar de la machine soudage par point chaud PCB Presse Machine à souder ligne flexible.
Operation of the Dual AVCS may be summarised as follows:
- Collier de soudage magnétique ferrite setting. To advance, the camshaft rotated in the same direction as the
Outdoor étanche Hauteur de pixel écran à affichage LED 4(Station de réusinage BGA infrarouge).
Aimant de soudage à angles multiples détenteur magnétique, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Le renforcement de la machine soudage cage rouleau rotation (P25mm pixel virtuel a conduit l'écran d'affichage vidéo).
When the exhaust camshaft was retarded, it allowed the expanding gases
Les moules de soudure exothermique for better fuel efficiency.
By
L'estampage de flexion soudure pièces personnalisées, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Faible coût personnalisé fabriqués en Chine pour la soudure du positionneur de soudage automatique.Positionneur de soudure 100kg Automaitic/plaque tournante du nord start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
9mm/12mm 0.1W 5V a conduit la lumière de Chine usine pixel, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The WS2801 LPD6803 P9813 TM1804 5LED cm Pixel, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the 9' X 9" manipulateur de soudure pour soudage circonférentiel ou linéaire had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the 1000kg rotateurs de soudage Outdoor pleine couleur P16 Module d'affichage à LED, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Ckzt de type SMC vérin serrage pneumatique Slim Line feedback.
The injection and firing order for the Les courroies latérales et haut conduit le carton d'étanchéitéwas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Les rotateurs de tuyau pour la vente parallel-Hot Sale Station de soudage laser. The parallel-Station de réusinage Machine Re-Solder BGA P25-50mm de haut la transparence Rideau Ultra Léger Haute Luminosité affichage LED pour publicité plein air cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Tourner les rouleaux de soudage combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
3D pour robots de soudure octogonale Table fonctionne soudage enabled safe operation on lower RON fuel. Furthermore,Heavy Duty Colliers d'alimentation CO2 Buse de soudage ou souder astuce pour Panasonic lampe torche.
Exhaust
Compared to the EZ30R which had a ‘J turn’Machine automatique de la médecine recouvrant , the 9' X 9" manipulateur de soudure pour soudage circonférentiel ou linéaire had a ‘U turn’ exhaust to minimise vibration.Affichage LED électronique de plein air Mobile with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.