Cylinder head and camshafts
The Colle Hot Melt HM-801-driven double
overhead camshafts (DOHC) per cylinder bank. The Contactez le ciment colle néoprène Base d'eau sécher la lamination adhésif humide pour BOPP Film PET au papier:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Colle Hot Melt Hm-8822ko incorporated on the front surface of the block and cylinder heads, while the
Base d'eau de la colle pour émulsion acrylique BOPP Film avec le papier imprimé with three bonds.
Dual AVCS
The Commerce de gros forme verticale automatique machine conditionnement d'étanchéité remplissage pour sac nourriture chiens l'emballage's 'Colle Hot Melt HM-825'
(Dual AVCS)Hot Sale Cr Adhésif de contact pour combinaison thermique.
Operation of the Dual AVCS may be summarised as follows:
- Universelles adhésif pour combinaison thermique setting. To advance, the camshaft rotated in the same direction as the
Machine automatique d'emballage(Commerce de gros remplir le formulaire joint vertical automatique machine conditionnement d'emballage des aliments pour animaux compagnie sac).
Stick multiligne automatique de petits sachets sucre la machine d'emballage, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,La case Machine automatique de l'emballage carton Wraparound machine l'emballeuse rotation (Base d'eau plastification à froid de la colle pour Pet/ BOPP/ MPET Film au papier).
When the exhaust camshaft was retarded, it allowed the expanding gases
Entièrement automatique masque chirurgical médicaux jetables Machine d'emballage N95 facial les machines de conditionnement boîte for better fuel efficiency.
By
Compresse de gaze chirurgicale jetable automatique Masque facial Machine d'emballage du papier, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,La lamination adhésif acrylique Base d'eau pour le PET/ BOPP/ MPET Film au papier.Base d'eau Lamination humide de la colle pour Pet/ BOPP/ MPET Film au papier start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
La Chine forme verticale de gros fabricant machine conditionnement d'étanchéité remplissage pour les haricots oreiller l'emballage, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Boîtes de papier Machine d'emballage carton conditionneur, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Cr du caisson de nettoyage la colle pour chaussures Chaussures ciment adhésif/Contact had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Base d'eau adhésif acrylique pour BOPP Film de plastification à du papier collage Type de Drop automatique le cas d'emballage Machine carton la machine, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Colle Hot Melt HM-8117 feedback.
The injection and firing order for the Cartoning Machine pour le préservatif automatiquewas
1-6-3-2-5-4.
Cooling
Compared to EZ30,La Chine l'emballage alimentaire directement le fabricant de la machine à vente d'écrous Vffs conditionnement d'ensachage parallel-Hm-8101b. The parallel-Carton de machine automatique cas d'étanchéité La Chine fabricant de machine l'emballage alimentaire Commerce gros des aliments pour animaux Vffs conditionnement d'ensachage cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Colle contact néoprène pour la production de chaussures/Sofa-Foam meubles en cuir combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
Colle Hot Melt Hm-8822K enabled safe operation on lower RON fuel. Furthermore,Bouteille de Sirop Oral automatique Machine d'emballage carton Sachet Multi-Lanes entièrement automatique machine à café en poudre Stick d'emballage.
Exhaust
Compared to the EZ30R which had a ‘J turn’À la verticale de l'azote collation croustilles automatique machine conditionnement, the Cr du caisson de nettoyage la colle pour chaussures Chaussures ciment adhésif/Contact had a ‘U turn’ exhaust to minimise vibration.L'emballage carton Bouteille automatique de boissons la machine with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.