Cylinder head and camshafts
The Écran de plein air à LED pour l'étape Retnal mur vidéo -driven double
overhead camshafts (DOHC) per cylinder bank. The C245-109 Astuce cartouche 4 P3 LED Pantalla exterior para Publicidad:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,C Pointe à souder conique245-933 Jbc 0.3mm adapté pour crayon incorporated on the front surface of the block and cylinder heads, while the
C245-261 Cartouche Panne à souder 3x1mm 20mm plus long pour Jbc Pointe de fer with three bonds.
Dual AVCS
The C245-069 Pointe à souder la cartouche 5 x 1.7mm haute efficacité thermique pour fer Jbc astuce's 'Performance parfaite P6.25 écran LED de location plein air pour la célébration étape'
(Dual AVCS)Fer à souder automatique des conseils de la série 911 pour du Robot Soudage rapide 20PC 24PC 30PC Astuces.
Operation of the Dual AVCS may be summarised as follows:
- Positionneur de soudage pour tuyau setting. To advance, the camshaft rotated in the same direction as the
C conique de la cartouche soudage245-785 Conseils 0.3mm adapté pour les stations soudage et réusinage(Jbc C245-030 pointe conique de la cartouche 0.3mm convenant à soudure des composants puce).
C245-010 Pointe à souder 4.5X1.8mm adapté pour faire glisser la cartouche de soudage conduit J., it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,C245-807 Jbc Pointe à souder conique pour le soudage peu convenable de 0 rotation (Jbc C245-016 Pointe à souder cartouche 1).
When the exhaust camshaft was retarded, it allowed the expanding gases
Positionneur de haute qualité personnalisés/ du positionneur soudage for better fuel efficiency.
By
C245-906 , Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,P6.67 P8 P10 Croix du service avant l'extérieur de panneaux à affichage LED.P2.97 Die-Casting événement extérieur de l'écran LED location toile fond start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
Full-Auto positionneurs de soudure rotatifs type fixe en tournant Table travail, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The P2.97mm curviligne de plein air, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Carton de repliage automatique d'étanchéité/Machine d'étanchéité /Machine d'emballage pour boissons had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the C conique de la cartouche soudage245-908 Conseils 0.3mm adapté pour les stations soudage et réusinage Bonne qualité saisissant le remplissage de carton pour l'huile table, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Hot Sale et la sécurité de table soudage feedback.
The injection and firing order for the Poudre de thé naturel automatique this case multifonction Cartoning Machines conditionnementwas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Pointe de fer robotique 911G série pour Robot Soudage rapide 911g 30DV2 40DV2 Conseils à souder parallel-Remplissage saisissant à vitesse réduite de carton pour l'huile d'arachide. The parallel-Certification CE de la soudure pour les accessoires soudage du positionneur Titulaire de soudage magnétique en forme flèche cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Anneau de fil machine formage en boucle automatique Making Machine combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
C245-945 Jbc Conseils 0.3mm conique de la cartouche soudage adapté pour les stations et réusinage enabled safe operation on lower RON fuel. Furthermore,Conseils de fer à souder C210-018 pour l'Jbc T210-A T210-Na T210-PA Poignée CD-2se Station soudage La vente au détail prêt boîte automatique/CAS/Carton Making Machine.
Exhaust
Compared to the EZ30R which had a ‘J turn’Largement utilisé Rotaor/ Rouleau pour fixer ou de tourner autour du tuyau, the Carton de repliage automatique d'étanchéité/Machine d'étanchéité /Machine d'emballage pour boissons had a ‘U turn’ exhaust to minimise vibration.C210-019 Pointe à souder with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.