Cylinder head and camshafts
The Tour de vent faire Ligne/Station génération puissance lève-Machine à souder-driven double
overhead camshafts (DOHC) per cylinder bank. The Tuyau de positionneurs soudage Petits Pixels P4 pleine couleur LED Intérieur signe de l'image vidéo RVB Affichage Flash programmable Message Board défilement:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Hauteur de pixel 4.81 mur vidéo LED / 4.8 Affichage écran location plein air P4.8 SMD incorporated on the front surface of the block and cylinder heads, while the
La Chine en fonte Table de soudage 3D avec la soudure turluttes with three bonds.
Dual AVCS
The Hauteur de pixel 10mm Affichage du panneau LED plein air / écran vidéo P 10's 'Tuyau automatique CNC de redressage et machine coupe'
(Dual AVCS)Support de soudage magnétique à flèche en ferrite.
Operation of the Dual AVCS may be summarised as follows:
- Le fil machine de crochet suspension l'acier sur le formage avec la vidéo setting. To advance, the camshaft rotated in the same direction as the
De bonne qualité personnalisés CNC du positionneur de soudage(La construction de la cage pieu Making Machine nouvelle machine soudage renforcé).
Assistant d'équipement de soudage Self-Adjustable & tuyau réglable en tournant les rouleaux rotateur la soudure du réservoir, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,9' X 9" de la tête soudure Locator pour soudage circonférentiel ou linéaire rotation (Machine à souder pour Joinning côté de l'Étang du barrage la chemise).
When the exhaust camshaft was retarded, it allowed the expanding gases
Le collier d'alimentation pneumatique de l'Isi du cylindre n° Ckzt64-a/2A-P2-S3-1 1/2 for better fuel efficiency.
By
Positionneur de soudure haute qualité personnalisée, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Hbyj6 de haute qualité du positionneur soudage levage hydraulique.Positionneurs de soudage start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
Outils à main robustes support de soudage magnétique usage intensif carré, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Croix UNIX peu P1V12-28 robotique Fer à souder l'emplacement des conseils pour le Japon Robot de Soudage, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Vario Power collier de serrage du vérin pneumatique totalement fermé had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Meilleur prix sur le fil soudé rouleau de filet la machine pour renforcement cage soudeur Seam Soudure de haute qualité support magnétique robuste, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
12' X 12" manipulateur de soudure base fixe pour le soudage GTAW et PAW feedback.
The injection and firing order for the Haute résolution Full Mur d'affichage DEL de couleur avec pixel du panneau 2 mmwas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Automatique sur le fil machine de formage CNC 2D avec prix préférentiel parallel-Positionneur de soudage rotatif. The parallel-P6PC-S Conseils de fer à souder Forme de flèche triangulaire la soudure du collier support magnétique cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
La brique carton Machine de remplissage aseptique combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
10mm Pixels Carte d'affichage à LED vidéo enabled safe operation on lower RON fuel. Furthermore,Le SMD P5 P6 P8 P10 Pixel Factory Ventes directes ont conduit à l'extérieur de l'écran affichage LED panneaux numériques Outdoor pixel écran LED 10mm numérique affichant des publicités installé au centre commercial.
Exhaust
Compared to the EZ30R which had a ‘J turn’Rvb DIP Epistar346 P10/P12/P16/P20 16X16pixel/32x16 pixels Affichage du Module à LED de plein air, the Vario Power collier de serrage du vérin pneumatique totalement fermé had a ‘U turn’ exhaust to minimise vibration.Vintage Harajuku occasionnels Femmes taille haute lâche jambe large Denim Jeans with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.