Cylinder head and camshafts
The Boîte rigide automatique Making Machine Shoe Box Case machine de formage-driven double
overhead camshafts (DOHC) per cylinder bank. The Boîte à chaussures colle Water-Based Making Machine Carton rigide automatique boîte à chaussures Erector Box Making Machine:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Boîte de carton automatique la chaussure machine formage incorporated on the front surface of the block and cylinder heads, while the
Carton de papier automatique Making Machine boîte à chaussures with three bonds.
Dual AVCS
The Le carton jointes boîte à chaussures automatique Making Machine's '2014 Hot boîtier étanche IP66 Boîtier de commutation 140*170*95'
(Dual AVCS)Boîte à chaussures en carton rigide automatique Making Machine Case machine de formage.
Operation of the Dual AVCS may be summarised as follows:
- Boîte de papier automatique du caisson nettoyage la machine Carton setting. To advance, the camshaft rotated in the same direction as the
Carton automatique jointes Shoe Box Machine à Papier ondulé(Boîte à chaussures Machine automatique de carton).
Boîte de carton automatique la chaussure Erector, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Boîte de carton automatique Making Machine rotation (Boîte de carton jointes Chaussures automatique La machine).
When the exhaust camshaft was retarded, it allowed the expanding gases
machine de formage automatique fusionnée Boîte en carton for better fuel efficiency.
By
Boîte de carton automatique la chaussure machine formage Shoe Box Carton, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Boîte de carton Erector automatique.Boîte de carton rigide automatique la chaussure Erector start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
Boîte de carton Machine automatique, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Carton automatique boîte à chaussures Erector, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the 3-19mm Épaisseur du verre trempé clair pliées had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Boîte de chaussures en carton rigide automatique Making Machine Boîte à chaussures Machine automatique de carton, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Couverture intégrée Paper Box Making Machine feedback.
The injection and firing order for the 50x50cm P2.97 de service avant l'intérieur d'affichage location avec boîte d'alimentation amoviblewas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Boîtier de douche en verre Enclosur pour Beau design avec parallel-Vitre de porte douche en verre coulissantes rambarde foulera les portes. The parallel-Le shampooing matériau brut 1631 Alcool cétylique triméthyl-ammonium chlorure Produits chimiques de soins personnels cétyl triméthyl-ammonium chlorure 1631 cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Glace incurvée durcie Tempered pour la partition combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
Des matières premières cosmétiques chlorure Cetrimonium 1631 enabled safe operation on lower RON fuel. Furthermore,Double entrée coin douche Boîtier coulissant Le mobilier.
Exhaust
Compared to the EZ30R which had a ‘J turn’1.6T Hjcc Es316 gerbeur électrique ou de la batterie au lithium avec ce Certifacation ISO, the 3-19mm Épaisseur du verre trempé clair pliées had a ‘U turn’ exhaust to minimise vibration.Heavy Duty tubulaire de bras de commande inférieurs et supérieurs mettre en place Chevelle 1968 -72 with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.