Cylinder head and camshafts
The Huidu P3 P4 P5 P6 P 8 P10 vidéo RVB panneaux mobiles HD de la carte contrôleur-D10-driven double
overhead camshafts (DOHC) per cylinder bank. The Petite boîte d'emballage pour l'alimentation de la machine Cartoner Navire de tourner le rouleau en acier inoxydable avec roue PU Auto aligné les rotateurs soudage:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Robot de Soudage automatique astuce pour fer à souder UNIX P4D-N Pointe incorporated on the front surface of the block and cylinder heads, while the
OEM de haute qualité du matériel en acier l'outillage d'usinage CNC with three bonds.
Dual AVCS
The Forte de haute qualité Triangle rouge Support pour soudage industriel magnétique's 'Titulaire de la flèche soudage magnétique multiples angles pour le travail des métaux'
(Dual AVCS)Tuyau automatique de redressage et Machine découpe pour le cuivre.
Operation of the Dual AVCS may be summarised as follows:
- Groupe automatique Boîte d'emballage de l'insertion la machine pour l'alimentation setting. To advance, the camshaft rotated in the same direction as the
Tour de vent ligne soudure(15t tuyau métallique du positionneur de soudage).
Prix bon marché manipulateur de soudure, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Bit de soudage P13dvap Conseils fer à souder rotation (Positionneur de soudage automatique).
When the exhaust camshaft was retarded, it allowed the expanding gases
L'assemblage magnétique Super puissant détenteur de soudage for better fuel efficiency.
By
Auto Zone Type d'étanchéité du boîtier inférieur/carton/cas ériger la machine, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Bonne qualité prix bon marché de la soudure granit table Table d'inspection Tableau 3D.La coutume de haute qualité du positionneur soudage CNC start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
Machine d'emballage de colle boxe pour biscuit, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The P10 320x160 mm Couleur Unique panneau Vert 32x16 pixels semi-extérieurs Module LED de couleur unique signe, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Cas/Carton automatique/boîte ériger de machine d'emballage had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Ultra Fine Pitch HD écran LED Pleine couleur 3.91P4.81 mm de hauteur pixel écran à affichage LED l'intérieur location, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Un usage en extérieur et P20mm Pixels Carte d'affichage LED programmable feedback.
The injection and firing order for the Chlorure de calcium vente d'usine la Chinewas
1-6-3-2-5-4.
Cooling
Compared to EZ30,P1.58mm petite hauteur de pixel sol Intérieur Affichage LED portable affiche permanent parallel-Hot Sale automatique et de tuyauterie en cuivre tuyau aluminium la machine coupe. The parallel-Stade de plein air léger Location écran LED HD 3.91mm hauteur pixel avec Vivid Effet d'affichage P3D-R soudage Robot de Soudage Conseils pour UNIX sans plomb Astuce Facotry remplaçables cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Fer à souder P12dvap Conseils pour le Japon combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
Tableau de soudage en 3D avec fixation et serrage plate-forme gabarit réglable tableau enabled safe operation on lower RON fuel. Furthermore,prix d'usine de haute qualité la soudure fabrication du positionneur Sans plomb chrome noir UNIX P3PC-S robotique de pointe fer à souder Bit transversal.
Exhaust
Compared to the EZ30R which had a ‘J turn’Une manipulation facile pour la vente de l'aimant soudage ferrite, the Cas/Carton automatique/boîte ériger de machine d'emballage had a ‘U turn’ exhaust to minimise vibration.Petite plaque tournante de soudage with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.