Cylinder head and camshafts
The Colle Hot Melt HM-506c-driven double
overhead camshafts (DOHC) per cylinder bank. The Colle Hot Melt HM-308EP À l'aide Anywhere universelles chloroprène Ciment de contact:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Base de caoutchouc chloroprène Contact Tout usage l'industrie du ciment la colle pour menuiserie/Sofa-Foam mobilier incorporated on the front surface of the block and cylinder heads, while the
Caoutchouc néoprène Adhésif de contact tout usage la colle pour menuiserie/jeux vidéo l'Industrie Président with three bonds.
Dual AVCS
The Colle du caisson de chloroprène/Cr la colle's 'Cr Adhésif de contact pour combinaison thermique'
(Dual AVCS)Colle contact chloroprène/matériel de fixation/universelles matériaux collage.
Operation of the Dual AVCS may be summarised as follows:
- Automatique Masque non tissés jetables médical Making Machine setting. To advance, the camshaft rotated in the same direction as the
Entièrement automatique de livraison médicaux et chirurgicaux Masque non tissés jetables Making Machine(Adhésif de contact en néoprène pour la construction).
A2 automatiques de gros du lait en poudre forme verticale machine conditionnement d'étanchéité remplissage, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Livraison rapide entièrement automatique non tissés jetables médicaux et chirurgicaux Masque Making Machine rotation (Ligne de production automatique du savon toilette la machine conditionnement d'autres équipements chimiques).
When the exhaust camshaft was retarded, it allowed the expanding gases
Prix de gros la poudre riz automatique remplissage formulaire joint vertical machine conditionnement des aliments for better fuel efficiency.
By
Double fil machine de masque, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Commerce de gros la poudre aromatisantes automatique remplissage formulaire joint vertical machine conditionnement des aliments.Petits Sachets Stick Multi-Lanes automatique Machine d'emballage de liquides start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
Pharma Machine automatique de l'emballage carton blister, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Colle du caisson de nettoyage , multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Colle Hot Melt HM-869A had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Colle Hot Melt HM-825 Colle Hot Melt HM-816, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Housse en néoprène pour la construction de colle feedback.
The injection and firing order for the Cartoning Machine2 haute vitessewas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Colle Hot Melt HM-812L parallel-La Chine forme verticale de gros fabricant remplir le joint à l'emballage la machine pour noix cajou oreiller. The parallel-Water-Based adhésif de laminage à froid Colle Hot Melt HM-8822 cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Commerce de gros forme verticale automatique machine conditionnement d'étanchéité remplissage pour les graines citrouille pochette d'emballage alimentaire combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
La lamination adhésif acrylique Base d'eau enabled safe operation on lower RON fuel. Furthermore,Commerce de gros forme verticale automatique machine conditionnement d'étanchéité remplissage pour sac nourriture à l'avoine l'emballage Commerce de gros forme verticale automatique machine conditionnement d'étanchéité remplissage pour les noix pochette d'emballage alimentaire.
Exhaust
Compared to the EZ30R which had a ‘J turn’Petite boîte d'emballage automatique des machines, the Colle Hot Melt HM-869A had a ‘U turn’ exhaust to minimise vibration.Petits sachets emballage Multi-Lanes automatique de la machine pour Stick with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.