Cylinder head and camshafts
The L'eau claire de la résine époxy Ab colle adhésif-driven double
overhead camshafts (DOHC) per cylinder bank. The Machine d'emballage du tabac Shisha automatique Sachet de granules pharmaceutiques Ligne production d'emballage avec cartoning machine:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Haute vitesse automatique ligne Cartoning Pharma blister incorporated on the front surface of the block and cylinder heads, while the
Plaquette thermoformée haute vitesse automatique Jienuo cartoning machine Ligne with three bonds.
Dual AVCS
The Le narguilé sac du tabac cartoning machine's 'Bcc-300 cartoning machine automatique de la plaquette thermoformée &'
(Dual AVCS)Petite boîte cartoning machine automatique pour l'alimentation.
Operation of the Dual AVCS may be summarised as follows:
- Dz/BT-80h Machine d'emballage de haute qualité setting. To advance, the camshaft rotated in the same direction as the
Vertical automatique/ cartoning machine d'emballage(Automatique de la médecine et d'emballage blister cartoning machine).
La ligne de production Cartoning Blister-Pilow-, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Cartoning Machine automatique de film étirable rotation (La production d'emballage automatique Pillow-Packer Cartoning Ligne ).
When the exhaust camshaft was retarded, it allowed the expanding gases
Ampoule cartoning machine de conditionnement avec doublure base for better fuel efficiency.
By
Boîte de lessive en poudre/granule machine conditionnement, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Boîte de poudre lavage machine conditionnement.Sachet/Ligne automatique de la production carton start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
AL/PL Blister-Carton Ligne de production d'emballage, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The L'emballage cartoning machine , multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Ligne de production automatique la médecine l'emballage had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the DPB-ZH Blister-Carton Ligne de production d'emballage automatique Cartoning Machine automatique , its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Nettoyant Facial Over-Wrapper Cartoner & Ligne de Production feedback.
The injection and firing order for the Pochette de l'alimentation automatique des prix d'emballage carton Conditionneur Machine d'étanchéitéwas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Vertical Machine Cartoner Dzh-120A parallel-Ampoule automatique Ligne d'emballage sous blister . The parallel-Machine de boxe en carton Comptage automatique de comprimés et capsules bouteille Ligne d'emballage cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Ligne d'embouteillage de comptage comprimés capsules combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
Flacon de automatique/ampoule Ligne production d'emballage sous blister enabled safe operation on lower RON fuel. Furthermore,Flacon de automatique/ampoule La norme ISO9001.
Exhaust
Compared to the EZ30R which had a ‘J turn’Ligne d'emballage Blister- Cartoning , the Ligne de production automatique la médecine l'emballage had a ‘U turn’ exhaust to minimise vibration.La plaquette thermoformée Cartoning Ligne de produits with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.