Cylinder head and camshafts
The Livraison rapide entièrement automatique non tissés jetables médicaux et chirurgicaux Masque Making Machine-driven double
overhead camshafts (DOHC) per cylinder bank. The Ligne de production automatique du savon toilette la machine conditionnement d'autres équipements chimiques Prix de gros la poudre riz automatique remplissage formulaire joint vertical machine conditionnement des aliments:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Double fil machine de masque incorporated on the front surface of the block and cylinder heads, while the
Commerce de gros la poudre aromatisantes automatique remplissage formulaire joint vertical machine conditionnement des aliments with three bonds.
Dual AVCS
The Petits Sachets Stick Multi-Lanes automatique Machine d'emballage de liquides's 'Boîte de dialogue Machine automatique la médecine l'emballage'
(Dual AVCS)Pharma Machine automatique de l'emballage carton blister.
Operation of the Dual AVCS may be summarised as follows:
- Colle du caisson de nettoyage setting. To advance, the camshaft rotated in the same direction as the
Colle Hot Melt HM-869A(Colle Hot Melt HM-825).
Colle Hot Melt HM-816, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Housse en néoprène pour la construction de colle rotation (Colle Hot Melt HM-812L).
When the exhaust camshaft was retarded, it allowed the expanding gases
La Chine forme verticale de gros fabricant remplir le joint à l'emballage la machine pour noix cajou oreiller for better fuel efficiency.
By
Water-Based adhésif de laminage à froid, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Colle Hot Melt HM-8822.Commerce de gros forme verticale automatique machine conditionnement d'étanchéité remplissage pour les graines citrouille pochette d'emballage alimentaire start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
La lamination adhésif acrylique Base d'eau, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Commerce de gros forme verticale automatique machine conditionnement d'étanchéité remplissage pour sac nourriture à l'avoine l'emballage, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Commerce de gros forme verticale automatique machine conditionnement d'étanchéité remplissage pour les noix pochette d'emballage alimentaire had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Petite boîte d'emballage automatique des machines Petits sachets emballage Multi-Lanes automatique de la machine pour Stick, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Commerce de gros forme verticale automatique machine conditionnement d'étanchéité remplissage pour l'Arachide sac d'emballage alimentaire feedback.
The injection and firing order for the Affichage LED à l'extérieur de l'écran mur vidéo Taux rafraîchissement élevéwas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Quatre côtés tissu humide d'étanchéité unique de décisions et machine d'emballage parallel-Commerce de gros forme verticale automatique machine conditionnement d'étanchéité remplissage pour les graines tournesol sac l'emballage. The parallel-Machine d'emballage d'Ongles commune avec boîtier de l'emballage Quatre côtés tissu humide d'étanchéité unique de décisions et machine d'emballage cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Adhésif de contact en néoprène à usage général combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
Colle Hot Melt HM-801 enabled safe operation on lower RON fuel. Furthermore,Contactez le ciment colle néoprène Base d'eau sécher la lamination adhésif humide pour BOPP Film PET au papier.
Exhaust
Compared to the EZ30R which had a ‘J turn’Colle Hot Melt Hm-8822ko, the Commerce de gros forme verticale automatique machine conditionnement d'étanchéité remplissage pour les noix pochette d'emballage alimentaire had a ‘U turn’ exhaust to minimise vibration.Base d'eau de la colle pour émulsion acrylique BOPP Film avec le papier imprimé with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.