Cylinder head and camshafts
The Fournisseur d'usine d'armature Machine à souder automatique Making de la cage pieu avec écran tactile-driven double
overhead camshafts (DOHC) per cylinder bank. The Coude de la bride couture et flèche colonne manipulateur soudage Outils de mesure D28 ou D16 en fonte Table soudage 3D:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Tour de vent faire Ligne/Station génération puissance lève-Machine à souder incorporated on the front surface of the block and cylinder heads, while the
Tuyau de positionneurs soudage with three bonds.
Dual AVCS
The Petits Pixels P4 pleine couleur LED Intérieur signe de l'image vidéo RVB Affichage Flash programmable Message Board défilement's 'Hauteur de pixel 3.91mm Outdoor écran vidéo numérique à LED haute luminosité'
(Dual AVCS)Hauteur de pixel 4.81 mur vidéo LED / 4.8 Affichage écran location plein air P4.8 SMD.
Operation of the Dual AVCS may be summarised as follows:
- La Chine en fonte Table de soudage 3D avec la soudure turluttes setting. To advance, the camshaft rotated in the same direction as the
Hauteur de pixel 10mm Affichage du panneau LED plein air / écran vidéo P 10(Support de soudage magnétique à flèche en ferrite).
Le fil machine de crochet suspension l'acier sur le formage avec la vidéo, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,De bonne qualité personnalisés CNC du positionneur de soudage rotation (La construction de la cage pieu Making Machine nouvelle machine soudage renforcé).
When the exhaust camshaft was retarded, it allowed the expanding gases
Assistant d'équipement de soudage Self-Adjustable & tuyau réglable en tournant les rouleaux rotateur la soudure du réservoir for better fuel efficiency.
By
9' X 9" de la tête soudure Locator pour soudage circonférentiel ou linéaire, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Machine à souder pour Joinning côté de l'Étang du barrage la chemise.Le collier d'alimentation pneumatique de l'Isi du cylindre n° Ckzt64-a/2A-P2-S3-1 1/2 start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
Positionneur de soudure haute qualité personnalisée, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Hbyj6 de haute qualité du positionneur soudage levage hydraulique, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Positionneurs de soudage had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Outils à main robustes support de soudage magnétique usage intensif carré Croix UNIX peu P1V12-28 robotique Fer à souder l'emplacement des conseils pour le Japon Robot de Soudage, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Vario Power collier de serrage du vérin pneumatique totalement fermé feedback.
The injection and firing order for the L'intérieur LED Haute luminosité faible écran du panneau griswas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Meilleur prix sur le fil soudé rouleau de filet la machine pour renforcement cage soudeur Seam parallel-Soudure de haute qualité support magnétique robuste. The parallel-12' X 12" manipulateur de soudure base fixe pour le soudage GTAW et PAW Automatique sur le fil machine de formage CNC 2D avec prix préférentiel cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Positionneur de soudage rotatif combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
P6PC-S Conseils de fer à souder enabled safe operation on lower RON fuel. Furthermore,Forme de flèche triangulaire la soudure du collier support magnétique La brique carton Machine de remplissage aseptique .
Exhaust
Compared to the EZ30R which had a ‘J turn’10mm Pixels Carte d'affichage à LED vidéo, the Positionneurs de soudage had a ‘U turn’ exhaust to minimise vibration.Le SMD P5 P6 P8 P10 Pixel Factory Ventes directes ont conduit à l'extérieur de l'écran affichage LED panneaux numériques with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.