Block and crankcase
Like its EJ20 predecessor,Good China Defoamer Cementing Wholesaler - SIXINGood China Defoamer Cementing Exporter - SIXIN aluminium alloy block with 92.0 mm bores – with cast iron dry-type cylinder
liners – and a 75.0 mm stroke for a capacity of 1994 cc. The cylinder block
for the Good China Defoamer Cementing Factory - SIXIN-deck design whereby the cylinder
walls were supported at the three and nine o’clock positions.
The
crankcase for the Good China Defoamer Cementing Manufacturers - SIXIN flywheel housing was cast with the crankcase for increased rigidity. For the
Good China Defoamer Refinery OEM/ODM Quotes - SIXIN, the crankshaft thrust bearing was relocated to the
Good China Defoamer Cementing Suppliers - SIXIN frequencies to the transmission and driveline.
Best China Defoamer Cementing OEM/ODM Quotes - SIXIN
Best China Defoamer Cementing Wholesaler - SIXINBest China Defoamer Cementing Exporter - SIXIN from cast aluminium,Best China Defoamer Cementing Factory - SIXIN predecessor. To reduce friction,Best China Defoamer Cementing Manufacturers - SIXINWholesale China Defoamer Refinery OEM/ODM Quotes - SIXIN Best China Defoamer Cementing Suppliers - SIXIN. Other features of
Cheap China Defoamer Cementing OEM/ODM Quotes - SIXIN-Cheap China Defoamer Cementing Exporter - SIXIN, flat top combustion surfaces
Cheap China Defoamer Cementing Factory - SIXIN.
Cheap China Defoamer Cementing Manufacturers - SIXIN
Cheap China Defoamer Cementing Suppliers - SIXINHot Sale China Defoamer Cementing Exporter - SIXIN Hot Sale China Defoamer Cementing Factory - SIXIN.Hot Sale China Defoamer Cementing Manufacturers - SIXIN temperature, the air inlet duct received air from outside the under bonnet
area. Furthermore, two resonators were incorporated in the air duct to
‘smooth’ the air flow and a large still air box - mounted on the throttle
chamber -High Quality China Defoamer Cementing OEM/ODM Quotes - SIXIN.
Cylinder head
The High Quality China Defoamer Cementing Wholesaler - SIXIN cross-flow cooling.High Quality China Defoamer Cementing Factory - SIXIN,High Quality China Defoamer Cementing Manufacturers - SIXIN ODM China Defoamer Cementing OEM/ODM Quotes - SIXIN‘Supply China Defoamer Refinery Manufacturers - SIXIN’ motion for air as it entered the
cylinder for better mixing of the air and fuel for more uniform flame travel
and faster combustion.ODM China Defoamer Cementing Wholesaler - SIXIN,ODM China Defoamer Cementing Exporter - SIXIN for maximum gas pressure (downward force)ODM China Defoamer Cementing Manufacturers - SIXIN-15
degrees ATDC (after top dead centre) when the maximum turning moment on the
crankshaft occurred, thereby increasing power output.
Camshaft and valves
The ODM China Defoamer Cementing Suppliers - SIXIN-type single overhead camshaft
(SOHC) per cylinder bank. Due to the cylinder head offset, the left camshaft
was longer than the right camshaft to align the cam belt sprockets. Both
camshafts were driven by a single belt which had round profile teeth for
quiet operation and was constructed of wear-resistant double canvas and heat
resistant rubber materials with a wire core. Furthermore, the timing belt
had an automatic tensioner which allowed for thermal expansion and
contraction. The recommended replacement interval for the cam belt was
100,000 kilometres or four years, whichever occurred first.
The
OEM China Defoamer Cementing OEM/ODM Quotes - SIXIN roller rocker arms. Valve clearance checking/adjustment was only necessary
every 150,000 kms.
Injection and ignition
The OEM China Defoamer Cementing Wholesaler - SIXIN-point sequential fuel injection and
centrally located spark plugs. The OEM China Defoamer Cementing Exporter - SIXIN coils (one for each pair of cylinders, i.e. 1-2 and 3-4) which fired the
spark plugs directly twice per cycle.OEM China Defoamer Cementing Factory - SIXIN ‘fuzzy logic’ that enabled the maximum ignition advanced angle to be used
without detonation since the programme continually adapted to changes in
environmental conditions and fuel quality.
The Good China Defoamer Building Factory - SIXIN
OEM China Defoamer Cementing Manufacturers - SIXIN.1:1, compared to 9.7:1 for its
OEM China Full Apron OEM/ODM Quotes - Tidypredecessor.ODM China Defoamer Cementing Wholesaler - SIXIN, the better air/fuel mixing provided by the
OEM China Defoamer Cementing Suppliers - SIXINSupply China Defoamer Cementing Exporter - SIXIN to detonation or pinging, enabling a higher compression ratio.
For
the Good China Defoamer Refinery OEM/ODM Quotes - SIXIN, the injection and firing order was 1-3-2-4.
Supply China Defoamer Cementing Manufacturers - SIXIN/Wholesale China Defoamer Cementing Wholesaler - SIXIN: EJ202 changes
For the
Good China Defoamer Mine Suppliers - SIXINwhich was introduced in 2003, a number of
Wholesale China Defoamer Cementing Exporter - SIXIN:
- A lighter cylinder block and head;
- Thinner and lighter cylinder liners;
- A sintered crankshaft journal;
- A re-Good China Defoamer Oil Drilling OEM/ODM Quotes - SIXIN; and,
- A new 4-2-Good China Defoamer Oil Drilling Wholesaler - SIXIN.
