Block and crankcase
Like its EJ20 predecessor,Best China Polyether Defoamer OEM/ODM Quotes - SIXINBest China Polyether Defoamer Wholesaler - SIXIN aluminium alloy block with 92.0 mm bores – with cast iron dry-type cylinder
liners – and a 75.0 mm stroke for a capacity of 1994 cc. The cylinder block
for the Best China Polyether Defoamer Factory - SIXIN-deck design whereby the cylinder
walls were supported at the three and nine o’clock positions.
The
crankcase for the Best China Polyether Defoamer Suppliers - SIXIN flywheel housing was cast with the crankcase for increased rigidity. For the
Best China Defoamer Water Base Manufacturers - SIXIN, the crankshaft thrust bearing was relocated to the
Cheap China Polyether Defoamer OEM/ODM Quotes - SIXIN frequencies to the transmission and driveline.
Cheap China Polyether Defoamer Wholesaler - SIXIN
Cheap China Polyether Defoamer Exporter - SIXINCheap China Polyether Defoamer Factory - SIXIN from cast aluminium,Cheap China Polyether Defoamer Suppliers - SIXIN predecessor. To reduce friction,Hot Sale China Polyether Defoamer OEM/ODM Quotes - SIXINGood China Polyether Defoamer Exporter - SIXIN Hot Sale China Polyether Defoamer Exporter - SIXIN. Other features of
Hot Sale China Polyether Defoamer Factory - SIXIN-Hot Sale China Polyether Defoamer Manufacturers - SIXIN, flat top combustion surfaces
Hot Sale China Polyether Defoamer Suppliers - SIXIN.
High Quality China Polyether Defoamer OEM/ODM Quotes - SIXIN
High Quality China Polyether Defoamer Wholesaler - SIXINHigh Quality China Polyether Defoamer Exporter - SIXIN High Quality China Polyether Defoamer Factory - SIXIN.High Quality China Polyether Defoamer Manufacturers - SIXIN temperature, the air inlet duct received air from outside the under bonnet
area. Furthermore, two resonators were incorporated in the air duct to
‘smooth’ the air flow and a large still air box - mounted on the throttle
chamber -ODM China Polyether Defoamer OEM/ODM Quotes - SIXIN.
Cylinder head
The ODM China Polyether Defoamer Wholesaler - SIXIN cross-flow cooling.ODM China Polyether Defoamer Manufacturers - SIXIN,ODM China Polyether Defoamer Suppliers - SIXIN OEM China Polyether Defoamer OEM/ODM Quotes - SIXIN‘Good China Polyether Defoamer OEM/ODM Quotes - SIXIN’ motion for air as it entered the
cylinder for better mixing of the air and fuel for more uniform flame travel
and faster combustion.OEM China Polyether Defoamer Wholesaler - SIXIN,OEM China Polyether Defoamer Exporter - SIXIN for maximum gas pressure (downward force)OEM China Polyether Defoamer Factory - SIXIN-15
degrees ATDC (after top dead centre) when the maximum turning moment on the
crankshaft occurred, thereby increasing power output.
Camshaft and valves
The OEM China Polyether Defoamer Suppliers - SIXIN-type single overhead camshaft
(SOHC) per cylinder bank. Due to the cylinder head offset, the left camshaft
was longer than the right camshaft to align the cam belt sprockets. Both
camshafts were driven by a single belt which had round profile teeth for
quiet operation and was constructed of wear-resistant double canvas and heat
resistant rubber materials with a wire core. Furthermore, the timing belt
had an automatic tensioner which allowed for thermal expansion and
contraction. The recommended replacement interval for the cam belt was
100,000 kilometres or four years, whichever occurred first.
The
Supply China Polyether Defoamer Wholesaler - SIXIN roller rocker arms. Valve clearance checking/adjustment was only necessary
every 150,000 kms.
Injection and ignition
The Supply China Polyether Defoamer Factory - SIXIN-point sequential fuel injection and
centrally located spark plugs. The Supply China Polyether Defoamer Manufacturers - SIXIN coils (one for each pair of cylinders, i.e. 1-2 and 3-4) which fired the
spark plugs directly twice per cycle.Supply China Polyether Defoamer Suppliers - SIXIN ‘fuzzy logic’ that enabled the maximum ignition advanced angle to be used
without detonation since the programme continually adapted to changes in
environmental conditions and fuel quality.
The Cheap China Defoamer Cleanig Exporter - SIXIN
Wholesale China Polyether Defoamer OEM/ODM Quotes - SIXIN.1:1, compared to 9.7:1 for its
OEM China Pre Galvanized Pipes Suppliers - TOPTACpredecessor.OEM China Polyether Defoamer Wholesaler - SIXIN, the better air/fuel mixing provided by the
Wholesale China Polyether Defoamer Exporter - SIXINWholesale China Polyether Defoamer Factory - SIXIN to detonation or pinging, enabling a higher compression ratio.
For
the Best China Defoamer Water Base Manufacturers - SIXIN, the injection and firing order was 1-3-2-4.
Wholesale China Polyether Defoamer Manufacturers - SIXIN/Good China Defoamer Polyether OEM/ODM Quotes - SIXIN: EJ202 changes
For the
Good China Antifoam Compound Suppliers - SIXINwhich was introduced in 2003, a number of
Good China Defoamer Polyether Wholesaler - SIXIN:
- A lighter cylinder block and head;
- Thinner and lighter cylinder liners;
- A sintered crankshaft journal;
- A re-Good China Defoamer Polyether Factory - SIXIN; and,
- A new 4-2-Good China Defoamer Polyether Suppliers - SIXIN.
