Block and crankcase
Like its EJ20 predecessor,Best China Defoamer Cementing Factory - SIXINBest China Defoamer Cementing Manufacturers - SIXIN aluminium alloy block with 92.0 mm bores – with cast iron dry-type cylinder
liners – and a 75.0 mm stroke for a capacity of 1994 cc. The cylinder block
for the Best China Defoamer Cementing Suppliers - SIXIN-deck design whereby the cylinder
walls were supported at the three and nine o’clock positions.
The
crankcase for the Cheap China Defoamer Cementing OEM/ODM Quotes - SIXIN flywheel housing was cast with the crankcase for increased rigidity. For the
Best China Defoamer Refinery Exporter - SIXIN, the crankshaft thrust bearing was relocated to the
Cheap China Defoamer Cementing Exporter - SIXIN frequencies to the transmission and driveline.
Cheap China Defoamer Cementing Factory - SIXIN
Cheap China Defoamer Cementing Manufacturers - SIXINCheap China Defoamer Cementing Suppliers - SIXIN from cast aluminium,Hot Sale China Defoamer Cementing Exporter - SIXIN predecessor. To reduce friction,Hot Sale China Defoamer Cementing Factory - SIXINGood China Defoamer Cementing Suppliers - SIXIN Hot Sale China Defoamer Cementing Manufacturers - SIXIN. Other features of
High Quality China Defoamer Cementing OEM/ODM Quotes - SIXIN-High Quality China Defoamer Cementing Wholesaler - SIXIN, flat top combustion surfaces
High Quality China Defoamer Cementing Factory - SIXIN.
High Quality China Defoamer Cementing Manufacturers - SIXIN
ODM China Defoamer Cementing OEM/ODM Quotes - SIXINODM China Defoamer Cementing Wholesaler - SIXIN ODM China Defoamer Cementing Exporter - SIXIN.ODM China Defoamer Cementing Manufacturers - SIXIN temperature, the air inlet duct received air from outside the under bonnet
area. Furthermore, two resonators were incorporated in the air duct to
‘smooth’ the air flow and a large still air box - mounted on the throttle
chamber -ODM China Defoamer Cementing Suppliers - SIXIN.
Cylinder head
The OEM China Defoamer Cementing OEM/ODM Quotes - SIXIN cross-flow cooling.OEM China Defoamer Cementing Wholesaler - SIXIN,OEM China Defoamer Cementing Exporter - SIXIN OEM China Defoamer Cementing Factory - SIXIN‘Good China Defoamer Cementing Factory - SIXIN’ motion for air as it entered the
cylinder for better mixing of the air and fuel for more uniform flame travel
and faster combustion.OEM China Defoamer Cementing Manufacturers - SIXIN,OEM China Defoamer Cementing Suppliers - SIXIN for maximum gas pressure (downward force)Supply China Defoamer Cementing Exporter - SIXIN-15
degrees ATDC (after top dead centre) when the maximum turning moment on the
crankshaft occurred, thereby increasing power output.
Camshaft and valves
The Supply China Defoamer Cementing Manufacturers - SIXIN-type single overhead camshaft
(SOHC) per cylinder bank. Due to the cylinder head offset, the left camshaft
was longer than the right camshaft to align the cam belt sprockets. Both
camshafts were driven by a single belt which had round profile teeth for
quiet operation and was constructed of wear-resistant double canvas and heat
resistant rubber materials with a wire core. Furthermore, the timing belt
had an automatic tensioner which allowed for thermal expansion and
contraction. The recommended replacement interval for the cam belt was
100,000 kilometres or four years, whichever occurred first.
The
Wholesale China Defoamer Cementing Wholesaler - SIXIN roller rocker arms. Valve clearance checking/adjustment was only necessary
every 150,000 kms.
Injection and ignition
The Wholesale China Defoamer Cementing Exporter - SIXIN-point sequential fuel injection and
centrally located spark plugs. The Good China Defoamer Oil Drilling OEM/ODM Quotes - SIXIN coils (one for each pair of cylinders, i.e. 1-2 and 3-4) which fired the
spark plugs directly twice per cycle.Good China Defoamer Oil Drilling Wholesaler - SIXIN ‘fuzzy logic’ that enabled the maximum ignition advanced angle to be used
without detonation since the programme continually adapted to changes in
environmental conditions and fuel quality.
The Wholesale China Defoamer Cement OEM/ODM Quotes - SIXIN
Good China Defoamer Oil Drilling Exporter - SIXIN.1:1, compared to 9.7:1 for its
Wholesale China Hand Shaped Sterilizer Exporter - FEEGOOpredecessor.OEM China Defoamer Cementing Manufacturers - SIXIN, the better air/fuel mixing provided by the
Good China Defoamer Oil Drilling Factory - SIXINGood China Defoamer Oil Drilling Manufacturers - SIXIN to detonation or pinging, enabling a higher compression ratio.
For
the Best China Defoamer Refinery Exporter - SIXIN, the injection and firing order was 1-3-2-4.
Good China Defoamer Oil Drilling Suppliers - SIXIN/Best China Defoamer Oil Drilling OEM/ODM Quotes - SIXIN: EJ202 changes
For the
OEM China Antifoam Manufacturer OEM/ODM Quotes - SIXINwhich was introduced in 2003, a number of
Best China Defoamer Oil Drilling Wholesaler - SIXIN:
- A lighter cylinder block and head;
- Thinner and lighter cylinder liners;
- A sintered crankshaft journal;
- A re-Best China Defoamer Oil Drilling Exporter - SIXIN; and,
- A new 4-2-Best China Defoamer Oil Drilling Factory - SIXIN.
