Block and crankcase
Like its EJ20 predecessor,Best China Defoamer Pulp Mill Factory - SIXINBest China Defoamer Pulp Mill Manufacturers - SIXIN aluminium alloy block with 92.0 mm bores – with cast iron dry-type cylinder
liners – and a 75.0 mm stroke for a capacity of 1994 cc. The cylinder block
for the Best China Defoamer Pulp Mill Suppliers - SIXIN-deck design whereby the cylinder
walls were supported at the three and nine o’clock positions.
The
crankcase for the Cheap China Defoamer Pulp Mill OEM/ODM Quotes - SIXIN flywheel housing was cast with the crankcase for increased rigidity. For the
Best China Defoamer Pulp Making Manufacturers - SIXIN, the crankshaft thrust bearing was relocated to the
Cheap China Defoamer Pulp Mill Wholesaler - SIXIN frequencies to the transmission and driveline.
Cheap China Defoamer Pulp Mill Suppliers - SIXIN
Hot Sale China Defoamer Pulp Mill OEM/ODM Quotes - SIXINHot Sale China Defoamer Pulp Mill Wholesaler - SIXIN from cast aluminium,Hot Sale China Defoamer Pulp Mill Exporter - SIXIN predecessor. To reduce friction,Hot Sale China Defoamer Pulp Mill Factory - SIXINGood China Defoamer Pulp Mill Factory - SIXIN Hot Sale China Defoamer Pulp Mill Manufacturers - SIXIN. Other features of
Hot Sale China Defoamer Pulp Mill Suppliers - SIXIN-High Quality China Defoamer Pulp Mill OEM/ODM Quotes - SIXIN, flat top combustion surfaces
High Quality China Defoamer Pulp Mill Wholesaler - SIXIN.
High Quality China Defoamer Pulp Mill Exporter - SIXIN
High Quality China Defoamer Pulp Mill Factory - SIXINHigh Quality China Defoamer Pulp Mill Manufacturers - SIXIN High Quality China Defoamer Pulp Mill Suppliers - SIXIN.ODM China Defoamer Pulp Mill OEM/ODM Quotes - SIXIN temperature, the air inlet duct received air from outside the under bonnet
area. Furthermore, two resonators were incorporated in the air duct to
‘smooth’ the air flow and a large still air box - mounted on the throttle
chamber -ODM China Defoamer Pulp Mill Wholesaler - SIXIN.
Cylinder head
The ODM China Defoamer Pulp Mill Exporter - SIXIN cross-flow cooling.ODM China Defoamer Pulp Mill Factory - SIXIN,ODM China Defoamer Pulp Mill Manufacturers - SIXIN ODM China Defoamer Pulp Mill Suppliers - SIXIN‘Good China Defoamer Pulp Mill Wholesaler - SIXIN’ motion for air as it entered the
cylinder for better mixing of the air and fuel for more uniform flame travel
and faster combustion.OEM China Defoamer Pulp Mill OEM/ODM Quotes - SIXIN,OEM China Defoamer Pulp Mill Wholesaler - SIXIN for maximum gas pressure (downward force)OEM China Defoamer Pulp Mill Exporter - SIXIN-15
degrees ATDC (after top dead centre) when the maximum turning moment on the
crankshaft occurred, thereby increasing power output.
Camshaft and valves
The OEM China Defoamer Pulp Mill Factory - SIXIN-type single overhead camshaft
(SOHC) per cylinder bank. Due to the cylinder head offset, the left camshaft
was longer than the right camshaft to align the cam belt sprockets. Both
camshafts were driven by a single belt which had round profile teeth for
quiet operation and was constructed of wear-resistant double canvas and heat
resistant rubber materials with a wire core. Furthermore, the timing belt
had an automatic tensioner which allowed for thermal expansion and
contraction. The recommended replacement interval for the cam belt was
100,000 kilometres or four years, whichever occurred first.
The
OEM China Defoamer Pulp Mill Manufacturers - SIXIN roller rocker arms. Valve clearance checking/adjustment was only necessary
every 150,000 kms.
Injection and ignition
The OEM China Defoamer Pulp Mill Suppliers - SIXIN-point sequential fuel injection and
centrally located spark plugs. The Supply China Defoamer Pulp Mill OEM/ODM Quotes - SIXIN coils (one for each pair of cylinders, i.e. 1-2 and 3-4) which fired the
spark plugs directly twice per cycle.Supply China Defoamer Pulp Mill Wholesaler - SIXIN ‘fuzzy logic’ that enabled the maximum ignition advanced angle to be used
without detonation since the programme continually adapted to changes in
environmental conditions and fuel quality.
The High Quality China Antifoam Producer Suppliers - SIXIN
Supply China Defoamer Pulp Mill Factory - SIXIN.1:1, compared to 9.7:1 for its
OEM China Furniture Pads For Wood Floors Wholesaler - Newerapredecessor.OEM China Defoamer Pulp Mill OEM/ODM Quotes - SIXIN, the better air/fuel mixing provided by the
Supply China Defoamer Pulp Mill Suppliers - SIXINWholesale China Defoamer Pulp Mill Wholesaler - SIXIN to detonation or pinging, enabling a higher compression ratio.
For
the Best China Defoamer Pulp Making Manufacturers - SIXIN, the injection and firing order was 1-3-2-4.
Wholesale China Defoamer Pulp Mill Exporter - SIXIN/Wholesale China Defoamer Pulp Mill Factory - SIXIN: EJ202 changes
For the
Best China Defoamer Polyether Exporter - SIXINwhich was introduced in 2003, a number of
Wholesale China Defoamer Pulp Mill Manufacturers - SIXIN:
- A lighter cylinder block and head;
- Thinner and lighter cylinder liners;
- A sintered crankshaft journal;
- A re-Wholesale China Defoamer Pulp Mill Suppliers - SIXIN; and,
- A new 4-2-Good China Defoamer Paper Mill OEM/ODM Quotes - SIXIN.
