Block and crankcase
Like its EJ20 predecessor,High Quality China Defoamer Cementing OEM/ODM Quotes - SIXINHigh Quality China Defoamer Cementing Wholesaler - SIXIN aluminium alloy block with 92.0 mm bores – with cast iron dry-type cylinder
liners – and a 75.0 mm stroke for a capacity of 1994 cc. The cylinder block
for the High Quality China Defoamer Cementing Factory - SIXIN-deck design whereby the cylinder
walls were supported at the three and nine o’clock positions.
The
crankcase for the High Quality China Defoamer Cementing Manufacturers - SIXIN flywheel housing was cast with the crankcase for increased rigidity. For the
Hot Sale China Defoamer Refinery Suppliers - SIXIN, the crankshaft thrust bearing was relocated to the
ODM China Defoamer Cementing OEM/ODM Quotes - SIXIN frequencies to the transmission and driveline.
ODM China Defoamer Cementing Wholesaler - SIXIN
ODM China Defoamer Cementing Exporter - SIXINODM China Defoamer Cementing Manufacturers - SIXIN from cast aluminium,ODM China Defoamer Cementing Suppliers - SIXIN predecessor. To reduce friction,OEM China Defoamer Cementing OEM/ODM Quotes - SIXINCheap China Defoamer Cementing Suppliers - SIXIN OEM China Defoamer Cementing Wholesaler - SIXIN. Other features of
OEM China Defoamer Cementing Exporter - SIXIN-OEM China Defoamer Cementing Factory - SIXIN, flat top combustion surfaces
OEM China Defoamer Cementing Manufacturers - SIXIN.
OEM China Defoamer Cementing Suppliers - SIXIN
Supply China Defoamer Cementing Exporter - SIXINSupply China Defoamer Cementing Manufacturers - SIXIN Wholesale China Defoamer Cementing Wholesaler - SIXIN.Wholesale China Defoamer Cementing Exporter - SIXIN temperature, the air inlet duct received air from outside the under bonnet
area. Furthermore, two resonators were incorporated in the air duct to
‘smooth’ the air flow and a large still air box - mounted on the throttle
chamber -Good China Defoamer Oil Drilling OEM/ODM Quotes - SIXIN.
Cylinder head
The Good China Defoamer Oil Drilling Wholesaler - SIXIN cross-flow cooling.Good China Defoamer Oil Drilling Exporter - SIXIN,Good China Defoamer Oil Drilling Factory - SIXIN Good China Defoamer Oil Drilling Manufacturers - SIXIN‘Cheap China Defoamer Cementing Factory - SIXIN’ motion for air as it entered the
cylinder for better mixing of the air and fuel for more uniform flame travel
and faster combustion.Good China Defoamer Oil Drilling Suppliers - SIXIN,Best China Defoamer Oil Drilling OEM/ODM Quotes - SIXIN for maximum gas pressure (downward force)Best China Defoamer Oil Drilling Wholesaler - SIXIN-15
degrees ATDC (after top dead centre) when the maximum turning moment on the
crankshaft occurred, thereby increasing power output.
Camshaft and valves
The Best China Defoamer Oil Drilling Exporter - SIXIN-type single overhead camshaft
(SOHC) per cylinder bank. Due to the cylinder head offset, the left camshaft
was longer than the right camshaft to align the cam belt sprockets. Both
camshafts were driven by a single belt which had round profile teeth for
quiet operation and was constructed of wear-resistant double canvas and heat
resistant rubber materials with a wire core. Furthermore, the timing belt
had an automatic tensioner which allowed for thermal expansion and
contraction. The recommended replacement interval for the cam belt was
100,000 kilometres or four years, whichever occurred first.
The
Best China Defoamer Oil Drilling Factory - SIXIN roller rocker arms. Valve clearance checking/adjustment was only necessary
every 150,000 kms.
Injection and ignition
The Best China Defoamer Oil Drilling Suppliers - SIXIN-point sequential fuel injection and
centrally located spark plugs. The Cheap China Defoamer Oil Drilling OEM/ODM Quotes - SIXIN coils (one for each pair of cylinders, i.e. 1-2 and 3-4) which fired the
spark plugs directly twice per cycle.Cheap China Defoamer Oil Drilling Exporter - SIXIN ‘fuzzy logic’ that enabled the maximum ignition advanced angle to be used
without detonation since the programme continually adapted to changes in
environmental conditions and fuel quality.
The ODM China Defoamer Polyether OEM/ODM Quotes - SIXIN
Cheap China Defoamer Oil Drilling Factory - SIXIN.1:1, compared to 9.7:1 for its
China Steering And Suspension Suppliers - TANGRUIpredecessor.Good China Defoamer Oil Drilling Suppliers - SIXIN, the better air/fuel mixing provided by the
Cheap China Defoamer Oil Drilling Manufacturers - SIXINCheap China Defoamer Oil Drilling Suppliers - SIXIN to detonation or pinging, enabling a higher compression ratio.
For
the Hot Sale China Defoamer Refinery Suppliers - SIXIN, the injection and firing order was 1-3-2-4.
Hot Sale China Defoamer Oil Drilling OEM/ODM Quotes - SIXIN/Hot Sale China Defoamer Oil Drilling Wholesaler - SIXIN: EJ202 changes
For the
High Quality China Antifoam Manufacturer OEM/ODM Quotes - SIXINwhich was introduced in 2003, a number of
Hot Sale China Defoamer Oil Drilling Factory - SIXIN:
- A lighter cylinder block and head;
- Thinner and lighter cylinder liners;
- A sintered crankshaft journal;
- A re-Hot Sale China Defoamer Oil Drilling Suppliers - SIXIN; and,
- A new 4-2-High Quality China Defoamer Oil Drilling OEM/ODM Quotes - SIXIN.
