Block and crankcase
Like its EJ20 predecessor,Best China Defoamer Pulp Making OEM/ODM Quotes - SIXINBest China Defoamer Pulp Making Wholesaler - SIXIN aluminium alloy block with 92.0 mm bores – with cast iron dry-type cylinder
liners – and a 75.0 mm stroke for a capacity of 1994 cc. The cylinder block
for the Best China Defoamer Pulp Making Exporter - SIXIN-deck design whereby the cylinder
walls were supported at the three and nine o’clock positions.
The
crankcase for the Best China Defoamer Pulp Making Factory - SIXIN flywheel housing was cast with the crankcase for increased rigidity. For the
Cheap China Defoamer Powder Detergent Suppliers - SIXIN, the crankshaft thrust bearing was relocated to the
Best China Defoamer Pulp Making Manufacturers - SIXIN frequencies to the transmission and driveline.
Best China Defoamer Pulp Making Suppliers - SIXIN
Cheap China Defoamer Pulp Making OEM/ODM Quotes - SIXINCheap China Defoamer Pulp Making Wholesaler - SIXIN from cast aluminium,Cheap China Defoamer Pulp Making Exporter - SIXIN predecessor. To reduce friction,Cheap China Defoamer Pulp Making Factory - SIXINGood China Defoamer Pulp Making Exporter - SIXIN Cheap China Defoamer Pulp Making Suppliers - SIXIN. Other features of
Hot Sale China Defoamer Pulp Making OEM/ODM Quotes - SIXIN-Hot Sale China Defoamer Pulp Making Exporter - SIXIN, flat top combustion surfaces
Hot Sale China Defoamer Pulp Making Suppliers - SIXIN.
High Quality China Defoamer Pulp Making OEM/ODM Quotes - SIXIN
High Quality China Defoamer Pulp Making Wholesaler - SIXINHigh Quality China Defoamer Pulp Making Exporter - SIXIN High Quality China Defoamer Pulp Making Factory - SIXIN.High Quality China Defoamer Pulp Making Manufacturers - SIXIN temperature, the air inlet duct received air from outside the under bonnet
area. Furthermore, two resonators were incorporated in the air duct to
‘smooth’ the air flow and a large still air box - mounted on the throttle
chamber -High Quality China Defoamer Pulp Making Suppliers - SIXIN.
Cylinder head
The ODM China Defoamer Pulp Making OEM/ODM Quotes - SIXIN cross-flow cooling.ODM China Defoamer Pulp Making Wholesaler - SIXIN,ODM China Defoamer Pulp Making Exporter - SIXIN ODM China Defoamer Pulp Making Factory - SIXIN‘Good China Defoamer Pulp Making OEM/ODM Quotes - SIXIN’ motion for air as it entered the
cylinder for better mixing of the air and fuel for more uniform flame travel
and faster combustion.ODM China Defoamer Pulp Making Suppliers - SIXIN,OEM China Defoamer Pulp Making OEM/ODM Quotes - SIXIN for maximum gas pressure (downward force)OEM China Defoamer Pulp Making Wholesaler - SIXIN-15
degrees ATDC (after top dead centre) when the maximum turning moment on the
crankshaft occurred, thereby increasing power output.
Camshaft and valves
The OEM China Defoamer Pulp Making Exporter - SIXIN-type single overhead camshaft
(SOHC) per cylinder bank. Due to the cylinder head offset, the left camshaft
was longer than the right camshaft to align the cam belt sprockets. Both
camshafts were driven by a single belt which had round profile teeth for
quiet operation and was constructed of wear-resistant double canvas and heat
resistant rubber materials with a wire core. Furthermore, the timing belt
had an automatic tensioner which allowed for thermal expansion and
contraction. The recommended replacement interval for the cam belt was
100,000 kilometres or four years, whichever occurred first.
The
OEM China Defoamer Pulp Making Factory - SIXIN roller rocker arms. Valve clearance checking/adjustment was only necessary
every 150,000 kms.
Injection and ignition
The OEM China Defoamer Pulp Making Suppliers - SIXIN-point sequential fuel injection and
centrally located spark plugs. The Supply China Defoamer Pulp Making OEM/ODM Quotes - SIXIN coils (one for each pair of cylinders, i.e. 1-2 and 3-4) which fired the
spark plugs directly twice per cycle.Supply China Defoamer Pulp Making Wholesaler - SIXIN ‘fuzzy logic’ that enabled the maximum ignition advanced angle to be used
without detonation since the programme continually adapted to changes in
environmental conditions and fuel quality.
The Good China Polyether Defoamer Factory - SIXIN
Supply China Defoamer Pulp Making Factory - SIXIN.1:1, compared to 9.7:1 for its
Cheap China Diaper Changing Table Manufacturers - FEEGOOpredecessor.ODM China Defoamer Pulp Making Suppliers - SIXIN, the better air/fuel mixing provided by the
Supply China Defoamer Pulp Making Manufacturers - SIXINSupply China Defoamer Pulp Making Suppliers - SIXIN to detonation or pinging, enabling a higher compression ratio.
For
the Cheap China Defoamer Powder Detergent Suppliers - SIXIN, the injection and firing order was 1-3-2-4.
Wholesale China Defoamer Pulp Making OEM/ODM Quotes - SIXIN/Wholesale China Defoamer Pulp Making Wholesaler - SIXIN: EJ202 changes
For the
Cheap China Defoamer Oilfield Exporter - SIXINwhich was introduced in 2003, a number of
Wholesale China Defoamer Pulp Making Exporter - SIXIN:
- A lighter cylinder block and head;
- Thinner and lighter cylinder liners;
- A sintered crankshaft journal;
- A re-Wholesale China Defoamer Pulp Making Factory - SIXIN; and,
- A new 4-2-Wholesale China Defoamer Pulp Making Suppliers - SIXIN.
