Block and crankcase
Like its EJ20 predecessor,ODM China Defoamer Cementing Exporter - SIXINODM China Defoamer Cementing Manufacturers - SIXIN aluminium alloy block with 92.0 mm bores – with cast iron dry-type cylinder
liners – and a 75.0 mm stroke for a capacity of 1994 cc. The cylinder block
for the ODM China Defoamer Cementing Suppliers - SIXIN-deck design whereby the cylinder
walls were supported at the three and nine o’clock positions.
The
crankcase for the OEM China Defoamer Cementing OEM/ODM Quotes - SIXIN flywheel housing was cast with the crankcase for increased rigidity. For the
ODM China Defoamer Refinery OEM/ODM Quotes - SIXIN, the crankshaft thrust bearing was relocated to the
OEM China Defoamer Cementing Wholesaler - SIXIN frequencies to the transmission and driveline.
OEM China Defoamer Cementing Exporter - SIXIN
OEM China Defoamer Cementing Factory - SIXINOEM China Defoamer Cementing Manufacturers - SIXIN from cast aluminium,OEM China Defoamer Cementing Suppliers - SIXIN predecessor. To reduce friction,Supply China Defoamer Cementing Exporter - SIXINHigh Quality China Defoamer Cementing Factory - SIXIN Supply China Defoamer Cementing Manufacturers - SIXIN. Other features of
Wholesale China Defoamer Cementing Wholesaler - SIXIN-Wholesale China Defoamer Cementing Exporter - SIXIN, flat top combustion surfaces
Good China Defoamer Oil Drilling OEM/ODM Quotes - SIXIN.
Good China Defoamer Oil Drilling Wholesaler - SIXIN
Good China Defoamer Oil Drilling Exporter - SIXINGood China Defoamer Oil Drilling Factory - SIXIN Good China Defoamer Oil Drilling Manufacturers - SIXIN.Good China Defoamer Oil Drilling Suppliers - SIXIN temperature, the air inlet duct received air from outside the under bonnet
area. Furthermore, two resonators were incorporated in the air duct to
‘smooth’ the air flow and a large still air box - mounted on the throttle
chamber -Best China Defoamer Oil Drilling OEM/ODM Quotes - SIXIN.
Cylinder head
The Best China Defoamer Oil Drilling Wholesaler - SIXIN cross-flow cooling.Best China Defoamer Oil Drilling Exporter - SIXIN,Best China Defoamer Oil Drilling Factory - SIXIN Best China Defoamer Oil Drilling Suppliers - SIXIN‘High Quality China Defoamer Cementing OEM/ODM Quotes - SIXIN’ motion for air as it entered the
cylinder for better mixing of the air and fuel for more uniform flame travel
and faster combustion.Cheap China Defoamer Oil Drilling OEM/ODM Quotes - SIXIN,Cheap China Defoamer Oil Drilling Exporter - SIXIN for maximum gas pressure (downward force)Cheap China Defoamer Oil Drilling Factory - SIXIN-15
degrees ATDC (after top dead centre) when the maximum turning moment on the
crankshaft occurred, thereby increasing power output.
Camshaft and valves
The Cheap China Defoamer Oil Drilling Manufacturers - SIXIN-type single overhead camshaft
(SOHC) per cylinder bank. Due to the cylinder head offset, the left camshaft
was longer than the right camshaft to align the cam belt sprockets. Both
camshafts were driven by a single belt which had round profile teeth for
quiet operation and was constructed of wear-resistant double canvas and heat
resistant rubber materials with a wire core. Furthermore, the timing belt
had an automatic tensioner which allowed for thermal expansion and
contraction. The recommended replacement interval for the cam belt was
100,000 kilometres or four years, whichever occurred first.
The
Cheap China Defoamer Oil Drilling Suppliers - SIXIN roller rocker arms. Valve clearance checking/adjustment was only necessary
every 150,000 kms.
Injection and ignition
The Hot Sale China Defoamer Oil Drilling OEM/ODM Quotes - SIXIN-point sequential fuel injection and
centrally located spark plugs. The Hot Sale China Defoamer Oil Drilling Wholesaler - SIXIN coils (one for each pair of cylinders, i.e. 1-2 and 3-4) which fired the
spark plugs directly twice per cycle.Hot Sale China Defoamer Oil Drilling Factory - SIXIN ‘fuzzy logic’ that enabled the maximum ignition advanced angle to be used
without detonation since the programme continually adapted to changes in
environmental conditions and fuel quality.
The OEM China Antifoam Compound OEM/ODM Quotes - SIXIN
Hot Sale China Defoamer Oil Drilling Suppliers - SIXIN.1:1, compared to 9.7:1 for its
High Quality China Marine Fire Hose Cabinet Suppliers - WorldFirepredecessor.Cheap China Defoamer Oil Drilling OEM/ODM Quotes - SIXIN, the better air/fuel mixing provided by the
High Quality China Defoamer Oil Drilling OEM/ODM Quotes - SIXINHigh Quality China Defoamer Oil Drilling Wholesaler - SIXIN to detonation or pinging, enabling a higher compression ratio.
For
the ODM China Defoamer Refinery OEM/ODM Quotes - SIXIN, the injection and firing order was 1-3-2-4.
High Quality China Defoamer Oil Drilling Exporter - SIXIN/High Quality China Defoamer Oil Drilling Manufacturers - SIXIN: EJ202 changes
For the
OEM China Defoamer Powder Detergent Exporter - SIXINwhich was introduced in 2003, a number of
High Quality China Defoamer Oil Drilling Suppliers - SIXIN:
- A lighter cylinder block and head;
- Thinner and lighter cylinder liners;
- A sintered crankshaft journal;
- A re-ODM China Defoamer Oil Drilling OEM/ODM Quotes - SIXIN; and,
- A new 4-2-ODM China Defoamer Oil Drilling Suppliers - SIXIN.
