Block and crankcase
Like its EJ20 predecessor,High Quality China Defoamer Polyether Factory - SIXINHigh Quality China Defoamer Polyether Manufacturers - SIXIN aluminium alloy block with 92.0 mm bores – with cast iron dry-type cylinder
liners – and a 75.0 mm stroke for a capacity of 1994 cc. The cylinder block
for the High Quality China Defoamer Polyether Suppliers - SIXIN-deck design whereby the cylinder
walls were supported at the three and nine o’clock positions.
The
crankcase for the ODM China Defoamer Polyether OEM/ODM Quotes - SIXIN flywheel housing was cast with the crankcase for increased rigidity. For the
High Quality China Polyether Defoamer Exporter - SIXIN, the crankshaft thrust bearing was relocated to the
ODM China Defoamer Polyether Wholesaler - SIXIN frequencies to the transmission and driveline.
ODM China Defoamer Polyether Factory - SIXIN
ODM China Defoamer Polyether Manufacturers - SIXINODM China Defoamer Polyether Suppliers - SIXIN from cast aluminium,OEM China Defoamer Polyether OEM/ODM Quotes - SIXIN predecessor. To reduce friction,OEM China Defoamer Polyether Wholesaler - SIXINHot Sale China Defoamer Polyether Factory - SIXIN OEM China Defoamer Polyether Manufacturers - SIXIN. Other features of
OEM China Defoamer Polyether Suppliers - SIXIN-Supply China Defoamer Polyether OEM/ODM Quotes - SIXIN, flat top combustion surfaces
Supply China Defoamer Polyether Wholesaler - SIXIN.
Supply China Defoamer Polyether Factory - SIXIN
Supply China Defoamer Polyether Manufacturers - SIXINSupply China Defoamer Polyether Suppliers - SIXIN Wholesale China Defoamer Polyether OEM/ODM Quotes - SIXIN.Wholesale China Defoamer Polyether Wholesaler - SIXIN temperature, the air inlet duct received air from outside the under bonnet
area. Furthermore, two resonators were incorporated in the air duct to
‘smooth’ the air flow and a large still air box - mounted on the throttle
chamber -Wholesale China Defoamer Polyether Exporter - SIXIN.
Cylinder head
The Wholesale China Defoamer Polyether Factory - SIXIN cross-flow cooling.Wholesale China Defoamer Polyether Manufacturers - SIXIN,Good China Non-Silicone Defoamer OEM/ODM Quotes - SIXIN Good China Non-Silicone Defoamer Wholesaler - SIXIN‘Hot Sale China Defoamer Polyether Wholesaler - SIXIN’ motion for air as it entered the
cylinder for better mixing of the air and fuel for more uniform flame travel
and faster combustion.Good China Non-Silicone Defoamer Exporter - SIXIN,Good China Non-Silicone Defoamer Factory - SIXIN for maximum gas pressure (downward force)Good China Non-Silicone Defoamer Manufacturers - SIXIN-15
degrees ATDC (after top dead centre) when the maximum turning moment on the
crankshaft occurred, thereby increasing power output.
Camshaft and valves
The Good China Non-Silicone Defoamer Suppliers - SIXIN-type single overhead camshaft
(SOHC) per cylinder bank. Due to the cylinder head offset, the left camshaft
was longer than the right camshaft to align the cam belt sprockets. Both
camshafts were driven by a single belt which had round profile teeth for
quiet operation and was constructed of wear-resistant double canvas and heat
resistant rubber materials with a wire core. Furthermore, the timing belt
had an automatic tensioner which allowed for thermal expansion and
contraction. The recommended replacement interval for the cam belt was
100,000 kilometres or four years, whichever occurred first.
The
Best China Non-Silicone Defoamer Wholesaler - SIXIN roller rocker arms. Valve clearance checking/adjustment was only necessary
every 150,000 kms.
Injection and ignition
The Best China Non-Silicone Defoamer Factory - SIXIN-point sequential fuel injection and
centrally located spark plugs. The Cheap China Non-Silicone Defoamer OEM/ODM Quotes - SIXIN coils (one for each pair of cylinders, i.e. 1-2 and 3-4) which fired the
spark plugs directly twice per cycle.Cheap China Non-Silicone Defoamer Wholesaler - SIXIN ‘fuzzy logic’ that enabled the maximum ignition advanced angle to be used
without detonation since the programme continually adapted to changes in
environmental conditions and fuel quality.
The Cheap China Defoamer Paper Mill OEM/ODM Quotes - SIXIN
Cheap China Non-Silicone Defoamer Factory - SIXIN.1:1, compared to 9.7:1 for its
Supply China Steel Square Hollow Section Factory - TOPTACpredecessor.Good China Non-Silicone Defoamer Exporter - SIXIN, the better air/fuel mixing provided by the
Cheap China Non-Silicone Defoamer Manufacturers - SIXINCheap China Non-Silicone Defoamer Suppliers - SIXIN to detonation or pinging, enabling a higher compression ratio.
For
the High Quality China Polyether Defoamer Exporter - SIXIN, the injection and firing order was 1-3-2-4.
Hot Sale China Non-Silicone Defoamer OEM/ODM Quotes - SIXIN/Hot Sale China Non-Silicone Defoamer Wholesaler - SIXIN: EJ202 changes
For the
Best China USA Antifoam Producer Wholesaler - SIXINwhich was introduced in 2003, a number of
Hot Sale China Non-Silicone Defoamer Exporter - SIXIN:
- A lighter cylinder block and head;
- Thinner and lighter cylinder liners;
- A sintered crankshaft journal;
- A re-Hot Sale China Non-Silicone Defoamer Factory - SIXIN; and,
- A new 4-2-Hot Sale China Non-Silicone Defoamer Manufacturers - SIXIN.
