Block and crankcase
Like its EJ20 predecessor,Best China Defoamer Cementing Suppliers - SIXINCheap China Defoamer Cementing OEM/ODM Quotes - SIXIN aluminium alloy block with 92.0 mm bores – with cast iron dry-type cylinder
liners – and a 75.0 mm stroke for a capacity of 1994 cc. The cylinder block
for the Cheap China Defoamer Cementing Exporter - SIXIN-deck design whereby the cylinder
walls were supported at the three and nine o’clock positions.
The
crankcase for the Cheap China Defoamer Cementing Factory - SIXIN flywheel housing was cast with the crankcase for increased rigidity. For the
Cheap China Defoamer Refinery OEM/ODM Quotes - SIXIN, the crankshaft thrust bearing was relocated to the
Cheap China Defoamer Cementing Manufacturers - SIXIN frequencies to the transmission and driveline.
Cheap China Defoamer Cementing Suppliers - SIXIN
Hot Sale China Defoamer Cementing Exporter - SIXINHot Sale China Defoamer Cementing Factory - SIXIN from cast aluminium,Hot Sale China Defoamer Cementing Manufacturers - SIXIN predecessor. To reduce friction,High Quality China Defoamer Cementing OEM/ODM Quotes - SIXINBest China Defoamer Cementing Wholesaler - SIXIN High Quality China Defoamer Cementing Wholesaler - SIXIN. Other features of
High Quality China Defoamer Cementing Factory - SIXIN-High Quality China Defoamer Cementing Manufacturers - SIXIN, flat top combustion surfaces
ODM China Defoamer Cementing OEM/ODM Quotes - SIXIN.
ODM China Defoamer Cementing Wholesaler - SIXIN
ODM China Defoamer Cementing Exporter - SIXINODM China Defoamer Cementing Manufacturers - SIXIN ODM China Defoamer Cementing Suppliers - SIXIN.OEM China Defoamer Cementing OEM/ODM Quotes - SIXIN temperature, the air inlet duct received air from outside the under bonnet
area. Furthermore, two resonators were incorporated in the air duct to
‘smooth’ the air flow and a large still air box - mounted on the throttle
chamber -OEM China Defoamer Cementing Wholesaler - SIXIN.
Cylinder head
The OEM China Defoamer Cementing Exporter - SIXIN cross-flow cooling.OEM China Defoamer Cementing Factory - SIXIN,OEM China Defoamer Cementing Manufacturers - SIXIN OEM China Defoamer Cementing Suppliers - SIXIN‘Good China Defoamer Cementing Suppliers - SIXIN’ motion for air as it entered the
cylinder for better mixing of the air and fuel for more uniform flame travel
and faster combustion.Supply China Defoamer Cementing Exporter - SIXIN,Supply China Defoamer Cementing Manufacturers - SIXIN for maximum gas pressure (downward force)Wholesale China Defoamer Cementing Wholesaler - SIXIN-15
degrees ATDC (after top dead centre) when the maximum turning moment on the
crankshaft occurred, thereby increasing power output.
Camshaft and valves
The Wholesale China Defoamer Cementing Exporter - SIXIN-type single overhead camshaft
(SOHC) per cylinder bank. Due to the cylinder head offset, the left camshaft
was longer than the right camshaft to align the cam belt sprockets. Both
camshafts were driven by a single belt which had round profile teeth for
quiet operation and was constructed of wear-resistant double canvas and heat
resistant rubber materials with a wire core. Furthermore, the timing belt
had an automatic tensioner which allowed for thermal expansion and
contraction. The recommended replacement interval for the cam belt was
100,000 kilometres or four years, whichever occurred first.
The
Good China Defoamer Oil Drilling OEM/ODM Quotes - SIXIN roller rocker arms. Valve clearance checking/adjustment was only necessary
every 150,000 kms.
Injection and ignition
The Good China Defoamer Oil Drilling Wholesaler - SIXIN-point sequential fuel injection and
centrally located spark plugs. The Good China Defoamer Oil Drilling Exporter - SIXIN coils (one for each pair of cylinders, i.e. 1-2 and 3-4) which fired the
spark plugs directly twice per cycle.Good China Defoamer Oil Drilling Factory - SIXIN ‘fuzzy logic’ that enabled the maximum ignition advanced angle to be used
without detonation since the programme continually adapted to changes in
environmental conditions and fuel quality.
The OEM China Antifoam Agent OEM/ODM Quotes - SIXIN
Good China Defoamer Oil Drilling Manufacturers - SIXIN.1:1, compared to 9.7:1 for its
Wholesale China Universal Steering Knuckle OEM/ODM Quotes - TANGRUIpredecessor.Supply China Defoamer Cementing Exporter - SIXIN, the better air/fuel mixing provided by the
Good China Defoamer Oil Drilling Suppliers - SIXINBest China Defoamer Oil Drilling OEM/ODM Quotes - SIXIN to detonation or pinging, enabling a higher compression ratio.
For
the Cheap China Defoamer Refinery OEM/ODM Quotes - SIXIN, the injection and firing order was 1-3-2-4.
Best China Defoamer Oil Drilling Wholesaler - SIXIN/Best China Defoamer Oil Drilling Exporter - SIXIN: EJ202 changes
For the
Good China USA Antifoam Manufacturer Suppliers - SIXINwhich was introduced in 2003, a number of
Best China Defoamer Oil Drilling Factory - SIXIN:
- A lighter cylinder block and head;
- Thinner and lighter cylinder liners;
- A sintered crankshaft journal;
- A re-Best China Defoamer Oil Drilling Suppliers - SIXIN; and,
- A new 4-2-Cheap China Defoamer Oil Drilling OEM/ODM Quotes - SIXIN.
