Cylinder head and camshafts
The OEM China Galvanised Welded Mesh Exporter - Best Hardware-driven double
overhead camshafts (DOHC) per cylinder bank. The OEM China Galvanised Welded Mesh Factory - Best Hardware OEM China Galvanised Welded Mesh Manufacturers - Best Hardware:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,OEM China Galvanised Welded Mesh Suppliers - Best Hardware incorporated on the front surface of the block and cylinder heads, while the
Supply China Galvanised Welded Mesh OEM/ODM Quotes - Best Hardware with three bonds.
Dual AVCS
The Supply China Galvanised Welded Mesh Exporter - Best Hardware's 'Supply China Stainless Steel Welded Mesh Suppliers - Best Hardware'
(Dual AVCS)Supply China Galvanised Welded Mesh Factory - Best Hardware.
Operation of the Dual AVCS may be summarised as follows:
- Supply China Galvanised Welded Mesh Manufacturers - Best Hardware setting. To advance, the camshaft rotated in the same direction as the
Supply China Galvanised Welded Mesh Suppliers - Best Hardware(Wholesale China Galvanised Welded Mesh Exporter - Best Hardware).
Wholesale China Galvanised Welded Mesh Factory - Best Hardware, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Wholesale China Galvanised Welded Mesh Manufacturers - Best Hardware rotation (Wholesale China Galvanised Welded Mesh Suppliers - Best Hardware).
When the exhaust camshaft was retarded, it allowed the expanding gases
OEM China Welded Mesh Fencing OEM/ODM Quotes - Best Hardware for better fuel efficiency.
By
OEM China Welded Mesh Fencing Wholesaler - Best Hardware, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,OEM China Welded Mesh Fencing Exporter - Best Hardware.OEM China Welded Mesh Fencing Factory - Best Hardware start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
OEM China Welded Mesh Fencing Manufacturers - Best Hardware, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The OEM China Welded Mesh Fencing Suppliers - Best Hardware, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Supply China Welded Mesh Fencing OEM/ODM Quotes - Best Hardware had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Supply China Welded Mesh Fencing Wholesaler - Best Hardware Supply China Welded Mesh Fencing Exporter - Best Hardware, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Supply China Welded Mesh Fencing Manufacturers - Best Hardware feedback.
The injection and firing order for the Supply China Window Security Screen Wholesaler - Best Hardwarewas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Supply China Welded Mesh Fencing Suppliers - Best Hardware parallel-Wholesale China Welded Mesh Fencing OEM/ODM Quotes - Best Hardware. The parallel-Wholesale China Welded Mesh Fencing Wholesaler - Best Hardware Wholesale China Welded Mesh Fencing Exporter - Best Hardware cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Wholesale China Welded Mesh Fencing Factory - Best Hardware combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
Wholesale China Welded Mesh Fencing Manufacturers - Best Hardware enabled safe operation on lower RON fuel. Furthermore,Wholesale China Welded Mesh Fencing Suppliers - Best Hardware OEM China Welded Mesh Gabions OEM/ODM Quotes - Best Hardware.
Exhaust
Compared to the EZ30R which had a ‘J turn’OEM China Welded Mesh Gabions Wholesaler - Best Hardware, the Supply China Welded Mesh Fencing OEM/ODM Quotes - Best Hardware had a ‘U turn’ exhaust to minimise vibration.OEM China Welded Mesh Gabions Factory - Best Hardware with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.